The Accurate Reloading Forums
Midway Receive Drill and Tap Fixture

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/223102709

10 August 2008, 21:01
WPAHUNTER
Midway Receive Drill and Tap Fixture
I have a Midway Receive Drill and Tap Fixture and I have lost the bushings. Does anyone know where I can get them? I looked on Midway's site and they no longer list the fixture. Any help will be appreciated.

Thanks,

Hairy
11 August 2008, 00:56
ireload2
Check out Carr-Lane and McMaster-Carr
11 August 2008, 01:31
Yale
Dear WPAHunter:

I was in the same boat with the discontinued Wheeler drill and tap jig. The Forstner bushings from Brownells are about .001" in outside diameter smaller than the original Midway bushings, but should work.

B-Square dropped their jig and bushings, too.

Sincerely,

Chris Bemis
11 August 2008, 02:17
Don Markey
I don't know exactly which bushing you need but they still list a few whell bushing on the bottom of this search page. https://www.midwayusa.com/esearch.exe/search?search_key...to+Begin+Search.y=14
-Don