The Accurate Reloading Forums
411 KDF / 40 ,338 win.

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/127101916

08 February 2007, 14:07
gumboot458
411 KDF / 40 ,338 win.
Hi all ... Does any one here have a 411 kdf or 40 / 338 chamber reamer .??? And do chambering or such...Thanks ,,,,,gumboot...


.If it can,t be grown , its gotta be mined ....
10 February 2007, 16:43
Con
Not yet ... but I found a 'smith that can build me one Wink, using a 338WM reamer and then 41cal neck/throat reamers. I pulled the pin on the project when I discovered there are nil cheap .41cal pistol projectiles in FMJ configuration. The standard pistol stuff will turn your plinking loads into single-shot mode. But the 300gr Hornady, plus 400gr Woodleigh makes this wildcat very tempting.
Here's a hint ... build a 411/338WM. Buy the Lee 416Taylor dies and remove the expander plug from the FL sizer. Run 458WM cases in and the necks are sized down enough to firmly hold a 0.411". Nothing like cheap dies for your wildcats thumb
Cheers...
Con