The Accurate Reloading Forums
Installing a Pac Nor barrel

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/111105121

05 March 2004, 13:59
ranb40
Installing a Pac Nor barrel
I am considering rebarreling my Savage 110 rifle to 375-06. I was reading the section on pre-fit barrels at http://www.pac-nor.com/prefit/ and wondered exactly what they mean by "The prefit barrel comes to you with a short thread shank to be set back for proper head space;" What is a sort thread shank?

I have rebarreled a Savage rifle using an Adams and Bennett barrel and had no problems. Will a Pac Nor barrel require much work to install or is it drop-in? Thanks.

Randy
05 March 2004, 14:31
Dutch
I would suggest you make a phone call. My barrel was not short chambered or short threaded, just ready to screw onto the action. Just make sure you tell them which action diameter you have. HTH, Dutch.
05 March 2004, 15:19
bluetick
ranb40

Quote:

"The prefit barrel comes to you with a short thread shank to be set back for proper head space;"



This would mean that you would need a lathe to cut threads or at least lengthen the shank.Hope that makes sense.
In other words it's not drop in. To tell you the truth I really don't see why they do this on a savage. Maybe I don't fully understand how they go together.

Shawn
05 March 2004, 15:24
rembo
On a Savage 110 you wouldn't need a lathe,....or even a file.The headspace is set by positioning the barrel properly,with a headspace gauge,and torquing the locknut..........probably the easiest bolt action on which to replace the barrel.
06 March 2004, 06:48
scot
Savages aside, th normal prefit barrels are done a little different. You need to cut the shoulder back until the headspace is correct. A lathe is necessary. For someone that is set up to fit barrels this eliminates reamer rentals or reamer buying and the time assocaited with cutting the chamber. These barrels are a great idea, IMHO.