The Accurate Reloading Forums
Price of painting tailgate

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9221043/m/6101014911

27 October 2009, 01:06
OkieNewton
Price of painting tailgate
Some jerk flipped the switch on my fifthwheel hitch and the trailer fell on the tailgate. Mad Got a price of 175 just to paint the outside. The inside will have spray on liner. Will have to replace gate completeley. 175 is just paint not the gate.Does this seem a bit steep or am I just a bit tight with my money? Replacement gate is 300 used.
Okie


Keep yer powder dry and yer knife sharp.
27 October 2009, 03:55
Idaho Sharpshooter
Just buy one of the louvered steel ones and be done with it.

Rich
28 October 2009, 19:14
OkieNewton
I know you're not trying to get aother post to your count but it still would need paint. Wink


Keep yer powder dry and yer knife sharp.
28 October 2009, 23:05
Mark
I'm guessing the $175 is paint and also the preparation and application. If this is a used tailgate they will probably have to fill in a ding or two.

I don't want to sound like I am "siding the with man" here, but I think the only way you could save any measureable amount of money is to get on the phone yourself and start calling some junkyards automotive recycling facilities and see if you can locate a gate with your original color code. Even then it is a crap shoot but if the inside gets sprayed with bedliner and possibly gets one of those gate "end protector" trim strips you might get lucky and have it look passable.


for every hour in front of the computer you should have 3 hours outside
29 October 2009, 21:09
OkieNewton
I guess 175 may not be too bad. Another shop here in town quoted 250. I guess it is higher than I thought for painting.
Okie


Keep yer powder dry and yer knife sharp.
31 October 2009, 01:13
mstarling
Ah Crap Okie! You do have THE damnedest luck.

Hope other things better.


Mike

--------------
DRSS, Womper's Club, NRA Life Member/Charter Member NRA Golden Eagles ...
Knifemaker, http://www.mstarling.com
31 October 2009, 23:38
JBrown
$175 sounds pretty darn good IMO. I know that it sounds high for a single panel, but keep in mind thers is a fair bit if labor and cost just in the mixing(or sourcing) of the paint.

In fact it will take the painter just as long to mix the paint for one panel as it would to mix enough fot the whole truck.

There is an unbelievable amount of prep that must be done before the paint is applied.


Jason

"You're not hard-core, unless you live hard-core."
_______________________

Hunting in Africa is an adventure. The number of variables involved preclude the possibility of a perfect hunt. Some problems will arise. How you decide to handle them will determine how much you enjoy your hunt.

Just tell yourself, "it's all part of the adventure." Remember, if Robert Ruark had gotten upset every time problems with Harry
Selby's flat bed truck delayed the safari, Horn of the Hunter would have read like an indictment of Selby. But Ruark rolled with the punches, poured some gin, and enjoyed the adventure.

-Jason Brown
01 November 2009, 01:16
OkieNewton
Mike,
You are correct. I am certain it will change one of these days.
Gettin ready to go huntin. The 375 is bumpin holes at 100 yds. Still can't talk Beth into shooting it yet. Roll Eyes


Keep yer powder dry and yer knife sharp.