THE ACCURATE RELOADING DIY FORUM

Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
DIY spider-web stock painting
 Login/Join
 
one of us
posted Hide Post
No mask, just paint. The over spray sorta "fogs in" the inletting.
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With QuoteReport This Post
one of us
posted Hide Post
OK, this is more of a how not to do it, as I way oversprayed with the webbing compared to Craigsters professional result. Still, I find it an improvement over the pot metal panther ...



There is hope, even when your brain tells you there isn’t.
– John Green, author
 
Posts: 14084 | Location: Alamogordo, NM | Registered: 03 June 2000Reply With QuoteReport This Post
one of us
posted Hide Post
this is what they used to call "cobwebbing" on cars in the late 60's and into the 70's.
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With QuoteReport This Post
one of us
posted Hide Post
Bill, if you can not find the Krylon clear, go to the auto parts store and buy auto trunk paint clear coat.

Nice job, by the way.


Larry

"Peace is that brief glorious moment in history, when everybody stands around reloading" -- Thomas Jefferson
 
Posts: 3927 | Location: Kansas USA | Registered: 04 February 2002Reply With QuoteReport This Post
one of us
posted Hide Post
Larry, found the clear, put on a couple of coats and then rubbed on Johnson's paste wax per Craigster.


There is hope, even when your brain tells you there isn’t.
– John Green, author
 
Posts: 14084 | Location: Alamogordo, NM | Registered: 03 June 2000Reply With QuoteReport This Post
one of us
posted Hide Post
quote:
Originally posted by richj:
Put the stock up on Gunbroker and buy a new one.


Ok, I know this is an old post, but I can't not comment... Rich, you realize this the DIY forum, right? Given that, how does your "advice" help the OP?!
 
Posts: 1045 | Location: Washington State | Registered: 07 September 2005Reply With QuoteReport This Post
new member
posted Hide Post
I buy webbing paint at Hobby Lobby. These are people we should all patronize.
George
 
Posts: 53 | Registered: 22 November 2004Reply With QuoteReport This Post
one of us
posted Hide Post
sic 'em craigster...


Go Broncos!
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With QuoteReport This Post
one of us
posted Hide Post
Bondo is stock material..I use it on pattern stocks, but it cracks and falls out...I would use glass bedding under paint..

I think that spidering is hard to do, I know few gun painters will use it, it looks nice I had someone in Oregon do one for a rifle I built for a ranchers daughter where I hunt elk..It was spider over a boat paddle Ruger 7 mag..came out real nice and looked great with stainless steel..


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 38051 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 


Copyright December 1997-2021 Accuratereloading.com


Visit our on-line store for AR Memorabilia