The Accurate Reloading Forums
Stopping locks freezing??
03 January 2008, 20:58
nightwalker ukStopping locks freezing??
Please don't laugh at my plea for advice on how to stop locks (especially on land rovers) from freezing in wet and high wind chill conditions? Is there something I can spray into the locks that will stop this for a longtime?
When they are really frozen I have had to revert to peeing on the lock to gain access! Of course this is only is a temporary cure, long time it just makes matters worse!!!

(thought I would ask in the Alaska forum as you must incounter this problem regularly)
Cheers!
03 January 2008, 21:29
tsturmquote:
Originally posted by nightwalker uk:
Please don't laugh at my plea for advice on how to stop locks (especially on land rovers) from freezing in wet and high wind chill conditions? Is there something I can spray into the locks that will stop this for a longtime?
When they are really frozen I have had to revert to peeing on the lock to gain access! Of course this is only is a temporary cure, long time it just makes matters worse!!!

(thought I would ask in the Alaska forum as you must incounter this problem regularly)
Cheers!
Any thing you would put on a gun to repell moisture. Wen you get -10 to -50+ you need a graphite based product (dry) Good luck

03 January 2008, 22:15
MarkSimplest way is to heat the key with a cigarette lighter.
If a certain lock is a chronic offender, it may be best to remove the lock and throroughly flush it out with carburetor cleaner, then use a very light oil on a key several times to lubricate it.
The official protocol is to "never" use oil but powdered graphite. I have never found this to be satisfactory so I don't do it.
If your locks get frozen over, instead of sticky, due to an ice storm or freezing fog then I think the best thing to do is use those business card sized refrigerator magnets that companies hand out as promo items and cover the lock with those when you park the car.
Now, to hijack it back to guns I don't have a whole lot of experience with guns in super cold conditions, but for January hunts around here if it gets cold I'd just clean everything and use a dry silicon lube and never had any problems.
for every hour in front of the computer you should have 3 hours outside
03 January 2008, 22:53
YaleDear Nightwalker:
Get a can of WD-40 and insert the tube extending from the nozzle into the key slot and spray it up. It will loosen a lock up pretty quickly.
I have done this in the wet winters of Pennsylvania and in sub-zero winters in Colorado. Miraculously, after a couple of applications of WD-40, your locks will not freeze up anymore, since the dirt and more importantly the water is gone.
I'd be tempted to try G-96 gun treatment, which I use on my firearms. Supposidely it will not congeal even in sub-zero temperatures, but I cannot confirm this independently.
Sincerely,
Chris Bemis
04 January 2008, 01:49
akplsI just used some WD40 a couple days ago to unstick a frozen lock.

04 January 2008, 23:33
nightwalker ukCheers fellas,
This morning after apllying Napier gun cleaner aerosal spray into the locks, they all worked OK, had about a half inch of freezing fog everywere, no peeing this morning!!
Cheers
05 January 2008, 01:21
butchlocwe just drip a few drops of antifreeze on them - works to -30 or so
05 January 2008, 02:55
Cold ZeroAnother vote for powdered graphite.
Cold Zero
05 January 2008, 03:29
tsturmquote:
Originally posted by nightwalker uk:
Cheers fellas,
This morning after apllying Napier gun cleaner aerosal spray into the locks, they all worked OK, had about a half inch of freezing fog everywere, no peeing this morning!!
Cheers

05 January 2008, 11:33
scr83jpquote:
Originally posted by nightwalker uk:
Please don't laugh at my plea for advice on how to stop locks (especially on land rovers) from freezing in wet and high wind chill conditions? Is there something I can spray into the locks that will stop this for a longtime?
When they are really frozen I have had to revert to peeing on the lock to gain access! Of course this is only is a temporary cure, long time it just makes matters worse!!!

(thought I would ask in the Alaska forum as you must incounter this problem regularly)
Cheers!
I spray in Break Free it stops locks from freezing
05 January 2008, 16:15
Pete Equote:
Originally posted by nightwalker uk:
Please don't laugh at my plea for advice on how to stop locks (especially on land rovers) from freezing in wet and high wind chill conditions?
Cheers!
Nightwalker,
On a LandRover, the best idea is to divert the all the oils that leak out of the various seals so it ends up in the lock mechs...Problem solved!
Regards,
Pete
05 January 2008, 21:12
kk alaskaIn our water utility in AK we have the same problem on our padlocks. (over 200) Graphite can work, but hand warmers work well, alcohol based deicers also work. Warming locks to fast seems to promote future icing as diff. temps draw moisture. Then you have to use heat every time. WD 40 in extreme temps will have problems
in my experience. Try unlocking padlocks in -25F all day & you will sooon find out what works & does not.
kk alaska
07 January 2008, 01:37
Alex.YNW,
you ought to be careful peeing on the lock,
don't get too close, you imagine, something wet and fleshy touching frozen metal you could get yourself in all sorts of trouble, did you ever lick the inside of a freezer door when you were a kid?
potentially a whole world of trouble!!
you could get stuck up on the moor, hanging by your old fella stuck to the door lock.
your only saviour would be a 50 year old rambler with a map case and peter storm parka on!!
"hey mister any chance you could blow on this"
22 January 2008, 06:35
dirklawyerSub zero weather in the Colorado rockies, WD40 has never let me down on my 1979 FJ40 Landcruiser. Once a year is sufficient.
"An individual with experience is never at the mercies of an individual with an argument"
25 January 2008, 03:56
Allan DeGrootThere is a lubricant specifically made for locks...
Called (strangely enough) Lock-E-Z.
It's graphite in a light oil carrier dilued with an evaporating
solvent.
Most gas station convenience stores carry little
aerosol cans (scarcely bigger than a butane lighter)
of lock de-icer, (essentially aerosol isopropyl alcohol)
the poblem is that when you need them they are usually locked INSIDE the car with the frozen lock

My tailgate lock (only the right side one) on my pickup truck topper kept freezing when I was in wyoming I de-iced it by heating it with a miniature butane torch then pumped it full
of aerolube (a thin lithium grease)
AD
If I provoke you into thinking then I've done my good deed for the day!
Those who manage to provoke themselves into other activities have only themselves to blame.
*We Band of 45-70er's*
35 year Life Member of the NRA
NRA Life Member since 1984
26 January 2008, 09:25
Rayquote:
Originally posted by Alex.Y:
NW,
you ought to be careful peeing on the lock,
don't get too close, you imagine, something wet and fleshy touching frozen metal you could get yourself in all sorts of trouble, did you ever lick the inside of a freezer door when you were a kid?
potentially a whole world of trouble!!
you could get stuck up on the moor, hanging by your old fella stuck to the door lock.
your only saviour would be a 50 year old rambler with a map case and peter storm parka on!!
"hey mister any chance you could blow on this"

30 January 2008, 16:34
DMBEther will dispell moisture and unfreeze car door locks. It's sold in small spray cans for that purpose.
Don