The Accurate Reloading Forums
Plinker for Becca

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/7971019521/m/4851030112

18 May 2015, 20:29
Duane Wiebe (CG&R)
Plinker for Becca
x
18 May 2015, 21:12
HBH
Becca is a lucky girl!!

Very nice.
18 May 2015, 21:32
BaxterB
Good to see a finished example of that bottom metal, came out very nice. Classy little rifle.
18 May 2015, 22:30
Texas Killartist
Very Classy
19 May 2015, 00:28
lindy2
Is the BRNO #1 currently being manufactured?
19 May 2015, 02:42
MJines
Be the best equipped squirrel hunter in camp for sure with that rifle.


Mike
19 May 2015, 02:54
Evan K.
Fantastic rifle- I love it!


"If the women don't find you handsome, they should at least find you handy."
19 May 2015, 04:15
srtrax
Not to shabby coming from a big bore builder... Wink.


_____________________
Steve Traxson

19 May 2015, 07:58
bwanamrm
Slick little rig!


On the plains of hesitation lie the bleached bones of ten thousand, who on the dawn of victory lay down their weary heads resting, and there resting, died.

If you can talk with crowds and keep your virtue,
Or walk with Kings - nor lose the common touch...
Yours is the Earth and everything that's in it,
And - which is more - you'll be a Man, my son!
- Rudyard Kipling

Life grows grim without senseless indulgence.
19 May 2015, 08:15
Dall85
Another Masterpiece Duane! Take a deep bow sir, the applause is thunderous!


Jim
19 May 2015, 21:15
KimR
THATS what needs to happen to my Steyr Zephyr rifle!
20 May 2015, 04:41
butchlambert
quote:
Originally posted by lindy2:
Is the BRNO #1 currently being manufactured?


I think it has been several years since the #1 has been available new.
21 May 2015, 22:05
ZekeShikar
Dang! That's sweet!
Thanks for sharing.
Zeke
23 May 2015, 11:29
maral
Oh, Nice rifle!

I really got some ideas for what to do with my old Brno now! Smiler
23 May 2015, 15:55
Bren7X64
quote:
Originally posted by lindy2:
Is the BRNO #1 currently being manufactured?


Nope. Its descendants are - the CZ 455 and so on.

The #1 came out immediately postwar - mine is proofed 1947.

The #2 was out in the 60's - a friend of my Dad had one. I think these were the most common.

I have seen a few #5's as well - they are similar in many ways to the #1, without the silly #2 rear sight.


Beautiful little rifle, Duane.


--
Promise me, when I die, don't let my wife sell my guns for what I told I her I paid for them.
23 May 2015, 19:27
Nortman
Of course a girl ( Woman ), starts at the correct end. Get a very nice 22lr to begin with.. practice and have fun!

Then, a caliber shooting a 140-180 grain bullet, that fits inside a Mauser action.. and call it good.

Go hunt.
29 May 2015, 08:35
lavaca
Duane,

You can make a plinker look like a masterpiece.
31 May 2015, 04:06
butchlambert
quote:
Originally posted by Duane Wiebe (CG&R):
Thanks...Well...there;s no reason to cut corners on a custom no matter what caliber. Bet a 22 gets used a lot more than a 404 Jeff..don't ya think?


I think you are right as I have a lot more turtles to shoot than DG.
01 June 2015, 03:41
Mike_Dettorre
Nice touches on the butt plate, I have never seen allen head wood screws. Where did you get those?


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
02 June 2015, 19:54
custombolt
That widened/recessed portion of the bottom metal at the clip turned that inherently flat area into pure class.


Life itself is a gift. Live it up if you can.