The Accurate Reloading Forums
Question, long range rifle built in Texas

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/7971019521/m/3231037961

11 January 2012, 04:42
kudu56
Question, long range rifle built in Texas
A friend has a nephew, a marine, who had a .338 long range set up custom built in Texas a year or two ago. He claims the guy who made them gave one to each member of his squad. Not sure of all the particulars and all, such as scope or action, but the thing that made me wrinkle my forhead, was his comment, that the bullets fired from this rifle could never be traced. He claimed the rifleing from barrel to bullet was untraceable.I had never heard of such a thing. Have any of you?
11 January 2012, 04:45
D Humbarger
bsflag bsflag bsflag Those marines beleave anything. Wink



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
11 January 2012, 06:09
butchlambert
A big plus one. Must have been built by the goofy guys on TV.
11 January 2012, 06:31
J.D.Steele
The only way that the rifling would not engrave the bullet was if the ammo used sabots. Possible, but definitely not as accurate as non-sabot ammo.
Regards, Joe


__________________________
You can lead a human to logic but you can't make him think.
NRA Life since 1976. God bless America!
11 January 2012, 07:36
kudu56
I found it hard to believe also. Almost called BS, but I have known his uncle for years. So I just admired the rifle and shook my head.
11 January 2012, 08:29
Von Gruff
Smoothbore dancing dancing dancing

Von Gruff.


Von Gruff.

http://www.vongruffknives.com/

Gen 12: 1-3

Exodus 20:1-17

Acts 4:10-12


11 January 2012, 15:27
.404
It sounds like a misunderstanding of how a bullet works and some drama..
maybe check his lip for little pieces of BS hanging off of them...


I pray for mud on my boots the day I die...
Go see the nights of Africa.....
11 January 2012, 18:41
Boss Hoss
That is a funny post! Some people believe anything...
11 January 2012, 19:33
jens poulsen
..well Gunnie...paperpatchbullshit..!! holycow


DRSS: HQ Scandinavia. Chapters in Sweden & Norway
13 January 2012, 02:41
igorrock
What do you think about these ?




www.promaakari.wordpress.com/
13 January 2012, 07:24
J.D.Steele
quote:
Originally posted by igorrock:
What do you think about these ?


Velocity is impressive, accuracy has been iffy, VERY IFFY, in my rifles.
Regards, Joe


__________________________
You can lead a human to logic but you can't make him think.
NRA Life since 1976. God bless America!
13 January 2012, 09:46
montea6b
quote:
Originally posted by J.D.Steele:
Velocity is impressive, accuracy has been iffy, VERY IFFY, in my rifles.
Regards, Joe


I think he meant that the bullets themselves would not have rifling marks and could therefore not be traced...
13 January 2012, 18:36
J.D.Steele
quote:
Originally posted by montea6b:
quote:
Originally posted by J.D.Steele:
Velocity is impressive, accuracy has been iffy, VERY IFFY, in my rifles.
Regards, Joe


I think he meant that the bullets themselves would not have rifling marks and could therefore not be traced...

I already talked about saboted bullets in my earlier post above these. No, the bullets can't be traced, but also no, IMO and experience they won't be accurate enough to be useful at long range.
Regards, Joe


__________________________
You can lead a human to logic but you can't make him think.
NRA Life since 1976. God bless America!
06 February 2012, 21:24
CRUSHER
http://en.wikipedia.org/wiki/Polygonal_rifling

this is about the rifle not the bullet polygonal rifling is very hard to get forensic evedence from "see glock" our local lab can tell you calaber and that it was a glock but not a whole lot more.

yes this type rifle bbl is used on sniper rifles built in texas.


VERITAS ODIUM PARIT