The Accurate Reloading Forums
Rasp Shaping Ebony Forend Tip
27 December 2017, 00:59
SDHRasp Shaping Ebony Forend Tip
This sequence of photos shows the shaping of an ebony forend tip for a Hagn actioned custom rifle.
All shaping was done with a flat Liogier wood rasp.
These rasps can be ordered from me, see Classifieds.
Rounding first bottom flat, the bottom flat was elongated in second photo.
Rounding from side
Rounding corners
ACGG Life Member, since 1985
27 December 2017, 01:21
SDHRounding upper corner
Upper view
Completed The entire forend shaping was accomplished with the #40 and #50 patternmakers, and two-sided flat rasps. The forend panel shaped with the Modeler's rasp.
All was refined with 6" half round file, flat bastard file and sanded to 180 grit. The forend has a slightly swamped shape in profile.
The forend was held in the vise or on the barrel whenever possible during the shaping process. Much of the shaping was accomplished with the forend held firmly in one hand resting solidly against the leather covered vise jaw, rasping with the other hand
ACGG Life Member, since 1985
27 December 2017, 05:52
sliversMake enough flats, and pretty soon you have a 'round'.
27 December 2017, 19:45
SDHIn the right places, in the right order and the same side to side...
ACGG Life Member, since 1985
27 December 2017, 21:46
lindy2What does it mean to have a "swamped" shape.
28 December 2017, 02:00
meteA barrel that has a smaller diameter in the center than at the ends.
This is used especially for long barrels as used often in BP rifles for a more graceful look.
28 December 2017, 02:00
richjYou are the quintessential RASPutan
28 December 2017, 03:45
BobsterOoooh, sounds like area ruling a barrel. It sure makes sexy looking airplanes.
Area ruled B58 Hustler Bomber:
http://4.bp.blogspot.com/-KvRL...r+B-58+Hustler+1.jpgIn airplanes it is used to "fool" the air flowing over the fuselage to decrease trans-sonic drag.
quote:
Originally posted by mete:
A barrel that has a smaller diameter in the center than at the ends.
This is used especially for long barrels as used often in BP rifles for a more graceful look.
A number of years ago I had a sportered M98 Mauser that had significant pitting on the barrel about halfway of it's length. I sent it to a shop to have the steps removed. They had to go deeper at the rust point and the barrel was I guess swamped. It looks really cool and shoots great.
28 December 2017, 04:39
LesBrooksBobster,
I looked at the link for the B58. My wife and I worked on the bomber and was there for its first flight in 57 or 58. A very impressive fast plane.
Les
28 December 2017, 08:13
BobsterOh man what a memory! Hard to believe that plane was only 50 years beyond the Wright Bros. and came out of the same shop as the B36 Peacemaker. There are two beautiful examples of the B58 at the Grissom Museum in Indiana and the USAF Museum in Dayton, OH. The B1 bomber was heavily influenced by it.
quote:
Originally posted by LesBrooks:
Bobster,
I looked at the link for the B58. My wife and I worked on the bomber and was there for its first flight in 57 or 58. A very impressive fast plane.
Les
28 December 2017, 16:38
sliversquote:
Originally posted by SDH:
In the right places, in the right order and the same side to side...
Took that as a "given", some may need that pointed out, though.
29 December 2017, 23:24
AtkinsonJust the ticket for the man who has every thing. Somebody needs to tell my wife about these, Im too cheap to buy one.
Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120
rayatkinsonhunting@gmail.com
02 January 2018, 03:19
SDHIt' is much more difficult to accomplish quality work with cheap tools. Send your wife's email, maybe she would like you buy you a quality tool for your birthday?
In this case both the barrel and the the forend have a slight "tapered and flared" or swamped profile. The barrel is an octagon to round with a full length rib by Ralf Martini.
ACGG Life Member, since 1985
02 January 2018, 07:09
Bill LeeperIf I was to post photos like this where I am doing the work, there would be photos of me rasping my knuckles and a good portion of the tutorial would be given over to first aid treatments for stockmakers.
That is kind of like I do it except I don't dare get anywhere near my knuckles for the reasons mentioned above. Regards, Bill
02 January 2018, 19:43
SDHWith the courser rasps I often wear a leather glove on my left hand. With the Really course #3, I wear gloves on both hands, I call that one the chain saw!
ACGG Life Member, since 1985
09 January 2018, 09:57
SDHThe rasps were very well received at the ACGG area at the Dallas Safari Show. The hit was the 7" Modeller's Rasp that sold out! Cool Tool, like a miniature Pattermaker's rasp, easy to see it's functionality!! Tapering cheek piece coves, ejection ports, comb nose fluting~~
I re-ordered 10 Modeller's rasp including one Left-hand!!!Also Left-hand Patternmaker's!
I had a great trip, great show, enjoyed the entire event!
ACGG Life Member, since 1985
23 January 2018, 02:39
SDHI'm temporarily
Sold Out of the third batch of Liogier "Finest Kind" hand stitched rasps. I have a few Dual-sided Flat Rasps ($125 each + 15 Post) and Brass Bristled cleaning brushes ($15) In Stock. Anyone that uses rasps needs one of these Cleaning Brushes.
~~Sales are brisk~~~ LEE O GEE AYE ~~~
I guarantee these do not need sharpening when new as reported about other rasps. Nor are they dull like the Brazillian machine-made rasps others suggest.
See how they are made~~~~
https://www.youtube.com/watch?v=gQ09O3d8y9Q20 More Brand New Liogier rasps are on order and should be arriving shortly! Each one especially Hand-Made for each order. #49, #50 and the Special 7" Modeller's rasps ($90) are on the way.
I have just a couple of left handed Modellers and lefty #49 coming in this group...Let me know! I'll hold by request.
Thanks to all that have purchased!!
~~Lee O Gee Aye~~
SDH
ACGG Life Member, since 1985
24 January 2018, 00:35
DArcy_Echols_CoI am about to send 30 files in to be acid sharpened. The files are old but comfortable in my hands and I like them. Some have been chemically sharpened at least once. This is a great service and if I had invested in any great file such as those Steve is selling when the time came and it will, I would pack it up as well and have it chemically treated to continue using it.
24 January 2018, 01:10
SDHAnother batch of 20 Liogier brand-new rasps will be here next week.
For those of you that have old, dull #49, by all means send them for sharpening. I sent my first batch of dull files to Boggs more than 30 years ago, a great service.
These new Liogier (Lee o gee Aye) don't need to be sharpened and as my good friend Robert said, he will send them IF and when he uses them enough to dull them. A big IF! I've got #49 an #50 and 10 Modeller's rasps on the way.
D'Arcy, Duane you would love these little 7" #12 grain rasps!!
The two left-handed I ordered are spoken for, I'm going to reorder shortly, Anyone else want Left Hand? Let me know...and don't forget to get your brass bristled cleaning brush ($15), the best way to keep you new rasp
Sharp!
Thanks for all your support!
SDH
ACGG Life Member, since 1985
24 January 2018, 03:05
robert lernerSteve, no mention of a great ribeye while in Dallas ?
24 January 2018, 03:46
SDHHey Robert, that was a bone-in filet!!!
Absolutely the best steak (with marrow butter!) I've had in a looongg time!! Thanks to my pal from Anchorage!
John Linebaugh just stopped in the shop on his way through town!! Great guy, good visit! He brought a pair of super custom Ruger's cased by Huey with elephant hide, one .475 Linebaugh and one .500 Linebaugh. Truely amazing, all of John's trick stuff, bound for a museum!
ACGG Life Member, since 1985
25 January 2018, 00:41
Brian CanadaGreat photos.
IHMSA BC Provincial Champion and Perfect 40 Score, Unlimited Category, AAA Class.
27 January 2018, 08:39
SDHThanks Brian, some are larger that I like, I'm still getting used to Imgur image posting.
ACGG Life Member, since 1985
27 January 2018, 10:50
Von GruffIf you click on the large thumbnail selection they will always fit the page right. At east that is what I always do for Imgur.
27 January 2018, 18:29
Jim KobeSteve
From the looks of those jeans, you got your hands in your pockets too much

Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild
28 January 2018, 18:22
eskimo36Steve, I have been in John's shop and the amazing things there are almost endless. You both are true artists in the craft.
Curtis
"One shot is usually enough..."
30 January 2018, 08:47
SDHThanks mo36, I'm sure I can speak for both of us in saying Russell, Monet, Bierstadt, Davinci were artist.. at best we might be considered artisans.
I'm headed down to visit John and see his shop sometime this summer, I'm sure I'll enjoy it!!
ACGG Life Member, since 1985
06 February 2018, 01:32
SDH
Just in!
20 more Liogier brand new rasps, Finest Kind!
I bulked up in the Modeller's 7" fine cut. Duane? D'Arcy? 'ought to try them out!!!
$80 + post
ACGG Life Member, since 1985