The Accurate Reloading Forums
.45 lockback problem

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/7611043/m/8111047651

03 June 2011, 23:38
prof242
.45 lockback problem
Got a used Colt 1911 80's model .45ACP. The slide locks back as if empty about every second or third round. This is with four different magazines, each bought separately and different makers!
Any suggestions on fixing this problem?


.395 Family Member
DRSS, po' boy member
Political correctness is nothing but liberal enforced censorship
04 June 2011, 00:30
butchloc
your recoil spring is to light for the loads
04 June 2011, 08:58
prof242
Will replace that immediately to see if that helps. Thanks,
Max


.395 Family Member
DRSS, po' boy member
Political correctness is nothing but liberal enforced censorship
08 June 2011, 09:23
Chuck1911
The most likely culprit is your bullet noses hitting the slide stop.

1) wrong slide stop. If its other than a .45 the lobe may be protruding too far into the magazine channel.

2) your ammo. If its reloads you may need to shorten them up.

Generally the spring comes into play when the slide won't lock back on the last round. A proper 1911 will feed any decent ammo from any decent magazine.


Chuck Warner
Pistolsmith
/