The Accurate Reloading Forums
Ruger #1 in.416 Rigby

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/760101804/m/8741086831

18 August 2010, 06:34
KY Jim
Ruger #1 in.416 Rigby
Saw a new .416 Rigby Ruger #1 for sale, and the thought occurred to me, this would be an affordable way for me to find out if I can shoot heavier rifles. I mean, I'd hate to mortgage the house for a .450 or something and then find I didn't have the cojones to shoot it. The problem is, I get attached to GOOD Rifles, and would have a problem with selling it later to gather cash for something bigger. I HATE being Poor! Too many headaches!
18 August 2010, 06:53
jwm
I'm sure that this must vary from person to person, but I'll just mention that I find the Ruger #1 to be just about the most poorly-designed gun on the market when it comes to dishing out uncomfortable recoil. They are classy and beautiful guns, and I own and love several of them, but they kick like mules.

I suppose that, in a way, this makes them ideal for your purposes. If you are comfortable with a #1 in .416, you should have absolutely no problems with the same cartridge in any other gun.

John
18 August 2010, 06:55
Dukescav
I hear your pain. I hate to get rid of a good gun and lately I did just that in order to get my first double rifle. As many on here have stated, once you get that first one, it becomes an addiction. I just got my first, the Kodiak in 45-70 and love it. Also going to get a Merkel this weekend in a .308, something that I can use without getting beat up. I just spent the last 2 years rehabbing both my shoulders. The weight on the Kodiak really cut down the recoil on the 45-70 from the same loads I shoot in my Guide Gun, which does want to get a bit frisky some times. Save and take the plunge on what you really have wanted all your life anyway, it feels good.
18 August 2010, 07:09
KY Jim
jwm, I've never shot a #1 so was unaware of this. Could be why I never wanted one before, they just don't LOOK right. You know, like a SHARPS. That stock can't possibly have enough drop to be comfortable. But I guess we'll See.
18 August 2010, 07:26
dpcd
I add weight to the #1s, and they already have a hole in the stock for lead or a mercury reducer. It does make them balance butt heavy, but it cuts down on recoil. Muzzle brakes also work, but have drawbacks....I don't put them on "classic" single shote.
18 August 2010, 17:49
Bill/Oregon
Jim: Install a prefit Decellerator or Limbsaver and you are good to go with the No. 1. Also consider cast bullet loads in the Rigby. Very pleasant to shoot!


There is hope, even when your brain tells you there isn’t.
– John Green, author
18 August 2010, 18:02
Dutch44
When I purchased my first double rifle, a Rigby underlever hammer gun, I was apprehensive about the recoil as well. It was 1/4 in lop and not quite enough drop at the comb. Regardless, I had 100 original Kynoch rounds from the 1960's and, after touching off the first round a pleasing smile came across my face realizing that it was nothing more than a solid push. Less "recoil" than my 20 gauge Citori with high brass loads. When I obtained another double with correct dimensions the "recoil" was even less felt than the Rigby.

Dutch
20 August 2010, 03:08
JCS271
I have a 450NE Ruger #1 that is one of my favorite rifles. Before you ever fire a shot purchase the "Prefit" Limbsaver pad and put it on. Substantially greater recoil reduction than the decelerater pads. While I have some Warne QD rings for it, I prefer the open sights and at any reasonable range for this caliber, it will flatten whatever you point it at! Good Luck, set up properly you will love it.


"The difference between adventure and disaster is preparation."
"The problem with quoting info from the internet is that you can never be sure it is accurate" Abraham Lincoln
21 August 2010, 22:41
KY Jim
10-4, 'preciate the info.
22 August 2010, 00:49
Showbart
Unless you pad it and weight it as suggested I'd think that #1 in 416 Rigby will kick like a mule. If you want a sweet shooting cartridge get a 450/400, and in order to only break the bank a little get a Sabatti from Cabela's - $4999 to 5499 w/ kickers. Guys here like em. I handled a 470 the other day and it was alright. Actually for the price it would seem to great. I want guys here to shoot the shit outta them first to confirm that they won't get the shooter stomped by a buff. Another great option is an O/U 450/400 by Verney-Carron. Ken @ Kebco had them make one up, said it was nice, and under $7K I think. Big jump in quality too.
22 August 2010, 03:53
Marty
Or, get a CZ bolt in 416 Rigby, see if the recoil is manageable for you, and have the basis for a useful hunting rifle to boot.
If you don't hot rod the 416, the recoil is not too bad. If you snort 'em up to near Weatherby velocities, well, it's a bad idea.