The Accurate Reloading Forums
Labor Fur Ballistik Ammo

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/760101804/m/4791033491

23 November 2013, 14:30
.500mbogo
Labor Fur Ballistik Ammo
Has anyone heard of or had any experience with the above factory ammunition.

My local gun shop has some 600NE factory ammo in that brand, i thought id ask if anyone here has used this ammo before?
23 November 2013, 23:21
cal pappas
Not a clue and I thought I'd seen everything .600. (?)
cal


_______________________________

Cal Pappas, Willow, Alaska
www.CalPappas.com
www.CalPappas.blogspot.com
1994 Zimbabwe
1997 Zimbabwe
1998 Zimbabwe
1999 Zimbabwe
1999 Namibia, Botswana, Zambia--vacation
2000 Australia
2002 South Africa
2003 South Africa
2003 Zimbabwe
2005 South Africa
2005 Zimbabwe
2006 Tanzania
2006 Zimbabwe--vacation
2007 Zimbabwe--vacation
2008 Zimbabwe
2012 Australia
2013 South Africa
2013 Zimbabwe
2013 Australia
2016 Zimbabwe
2017 Zimbabwe
2018 South Africa
2018 Zimbabwe--vacation
2019 South Africa
2019 Botswana
2019 Zimbabwe vacation
2021 South Africa
2021 South Africa (2nd hunt a month later)
______________________________
23 November 2013, 23:41
505G
Never heard of it so I looked it up !

http://www.labor-fuer-ballisti...r_fur_ballistik.html


Previously 500N with many thousands of posts !
23 November 2013, 23:43
J.R.Jackson
It is from Germany.

http://www.labor-fuer-ballisti...r_fur_ballistik.html
24 November 2013, 00:33
.500mbogo
Thanks for the replies.

I was told its German, thought someone might have used it

Thought Cal might have known about it!
24 November 2013, 08:49
Mike Brooks
I'm sure that Cal will be happy to try out a few cases for you. He'll provide a shipping address.


NRA Life
ASSRA Life
DRSS

Today's Quote:
Give a man a fish and he eats for a day. Give a man a welfare check, a free cell phone with free monthly minutes, food stamps, section 8 housing, a forty ounce malt liquor, a crack pipe and some Air Jordan's and he votes Democrat for a lifetime.
24 November 2013, 13:04
mouse93


I have shot a few rounds from my friends .450/400 - it goes bang/bang Big Grin .



My friend is using those exclusively (his K gun was regulated with LFB's) and has shot a couple of critters in Zim so far. Excelent on the range - no clue on bullets they load - either A2 or Woodleighs? Guys from LFB say their loads are very similar to Hornady's.



LFB's TMR 450/400 next to Norma's 9,3x74R.



"A2 dead tough" ?
24 November 2013, 15:17
Bockhunter
Yes, there are from Germany.
Semi-custom-made amo.

Regulated in different Versions, good stuff, maybe a Little bit too expensive...


24 November 2013, 16:10
505G
That bullet looks like a Woodleigh.


Previously 500N with many thousands of posts !
24 November 2013, 21:37
MacD37
quote:
Originally posted by 505G:
Never heard of it so I looked it up !

http://www.labor-fuer-ballisti...r_fur_ballistik.html


…………………. And if I could read German, that would be a fine piece of information!
.................................................................... Big Grin


....Mac >>>===(x)===> MacD37, ...and DUGABOY1
DRSS Charter member
"If I die today, I've had a life well spent, for I've been to see the Elephant, and smelled the smoke of Africa!"~ME 1982

Hands of Old Elmer Keith

24 November 2013, 22:35
Mike Brooks
Todd the IP address into the google translator for a basic translation.

http://translate.google.com/#

It's hardly precise but better than nothing Mac.


NRA Life
ASSRA Life
DRSS

Today's Quote:
Give a man a fish and he eats for a day. Give a man a welfare check, a free cell phone with free monthly minutes, food stamps, section 8 housing, a forty ounce malt liquor, a crack pipe and some Air Jordan's and he votes Democrat for a lifetime.
25 November 2013, 17:37
mouse93
Their catalog is bilingual (DE/EN) - you can download it here:

http://www.labor-fuer-ballisti.../de/Katalog_2011.pdf
25 November 2013, 22:09
.500mbogo
The soft nosed 600NE bullets look to be woodleighs but the solids seem to be different.The solids dont have the more rounded shape that the woodleigh has.
27 November 2013, 05:45
new_guy
I've seen it used in the factory before; primarily in 577 & 600. I don't know if it's cheaper or more expensive, but I do recall they using the woodleighs in the big bores and tipped, banded monos in the smaller bores. I seem to remember they have a proprietary design. I'll be there in a week or so and ask again.


www.heymusa.com


HSC Booth # 306
SCI Booth # 3947
27 November 2013, 05:58
mdstewart
quote:
Originally posted by mouse93:
Their catalog is bilingual (DE/EN) - you can download it here:

http://www.labor-fuer-ballisti.../de/Katalog_2011.pdf



Mouse,

Where have you been? I am missing all your hunt reports and pictures of your adventures. Please stay more engaged. You are one of the most interesting characters here.

Mike


JP Sauer Drilling 12x12x9.3x72
David Murray Scottish Hammer 12 Bore
Alex Henry 500/450 Double Rifle
Steyr Classic Mannlicher Fullstock 6.5x55
Steyr Classic Mannlicher Fullstock .30-06
Walther PPQ H2 9mm
Walther PPS M2
Cogswell & Harrison Hammer 12 Bore Damascus
And Too Many More
27 November 2013, 12:36
mouse93
Thank you Mike. I am flattered.

- my best hunting buddy got hit by a brain stroke (he is coming around slowly - but still long way to go) and that was the main reason I put most of the hunting here aside lately (still going out every weekend tho but not much to write home about and things do look different now),
- according to rough seas here I passed 2 trips to Africa,
- played around with 8x68S this year
- in the course of improving shooting moving targets I sank deep into sporting clays matter (at the end I have attend. 2 international shoots in Italy and Austria)
- in process of buying a 470 (Africa wasn't behind the corner atm) got a Land Cruiser instead
- besides - I guess not much I can add to a debate lately...

Thanks anyway beer
27 November 2013, 16:40
Mauser9,3x62
I have heard that they load Degol bullets.