The Accurate Reloading Forums
Regulating medium bore doubles?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/760101804/m/197109685

15 December 2006, 01:21
Peter
Regulating medium bore doubles?
Ok I have a 9.3x74R Tikka 512. How do I "regulate" it and at what range? I have 2 big bore doubles and have tailored loads which group both barrels within 2" at 50 yards, and to point of aim. So, with a scoped O/U double is there anything different. It seems to me that there might be. First, the lower barrel may be adjustable, but my thought was to leave this as a last resort. So, should I tailor loads the same way as for a S/S double, and then see what happens at 100? I need some help here, as, from what I have read, this caliber should be at least 100 yard gun. What size groups would be acceptable at 100? etc. etc. Obviously with the scope, the impact/aimpoint can be adjusted easily. I am more concerned about typical acuracy levels with this caliber in a double, and the quickest way of getting there.
BTW. I like to consider the aesthetics of various loaded rounds. The Loaded 9.3x74R has got to be one of the best looking rounds around!
Thanks, Peter.
PS. I used the term "regulate" as a shorthand for "develop loads". Also, I have read that the lower barrel may be adjustable but have no clue as to how to do it. No manual came with the (used) gun.


Be without fear in the face of your enemies. Be brave and upright, that God may love thee. Speak the truth always, even if it leads to your death. Safeguard the helpless and do no wrong;
15 December 2006, 01:38
Mike Brooks
Here's some info from the other DR board that has 412 info that may help you out.

http://forums.nitroexpress.com/showflat.php?Cat=0&Numbe...n=0&page=0#Post53914


NRA Life
ASSRA Life
DRSS

Today's Quote:
Give a man a fish and he eats for a day. Give a man a welfare check, a free cell phone with free monthly minutes, food stamps, section 8 housing, a forty ounce malt liquor, a crack pipe and some Air Jordan's and he votes Democrat for a lifetime.
15 December 2006, 02:19
Snowwolfe
Post this question in "Combination Rifles and Drillings" and those folks will tell you how to regulate it.


My biggest fear is when I die my wife will sell my guns for what I told her they cost.
15 December 2006, 02:23
Peter
Wow Mike, thanks! I am a member over there, but don't go there very often
Peter.


Be without fear in the face of your enemies. Be brave and upright, that God may love thee. Speak the truth always, even if it leads to your death. Safeguard the helpless and do no wrong;
15 December 2006, 02:45
Peter
Snowwolfe, where is the forum you mentioned?
Peter.


Be without fear in the face of your enemies. Be brave and upright, that God may love thee. Speak the truth always, even if it leads to your death. Safeguard the helpless and do no wrong;
15 December 2006, 05:49
Snowwolfe
Right here,lol. Three "blocks" under the Double rifle section


My biggest fear is when I die my wife will sell my guns for what I told her they cost.
15 December 2006, 06:54
Peter
OOPS! Never even been there!
Thanks, Peter.


Be without fear in the face of your enemies. Be brave and upright, that God may love thee. Speak the truth always, even if it leads to your death. Safeguard the helpless and do no wrong;