The Accurate Reloading Forums
Thinking of selling a double at Dallas SC

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/760101804/m/1221062021

09 November 2009, 19:42
308Sako
Thinking of selling a double at Dallas SC


Browning Continental, German Claw mounted Leupold 3X duplex, .30-06 (regulated to 200 grain bullets) & 20 Ga - 3 inch chambers, Mod & Full. Hardcase to be included.

I assume as a Nevada resident I would be required to go through a Texas dealer? Any help or advice would be appreciated.

Thank you






Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.
09 November 2009, 19:51
Biebs
308, if it's a Belgian gun, it would be worthwhile to mention that. The O/U Browning doubles were made in both Belgium and Japan, with the Belgian makes selling for considerably more. What are you looking for on it?...Biebs
09 November 2009, 20:17
308Sako
Yes it is a Belgian, FN of course, see the patch in picture.

I have not posted a price as this is not the classified's.

I do have a number in mind, so a PM would be acceptable I think.






Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.
10 November 2009, 00:28
308Sako
A question was raised as to what load this rifle regulates with, and the best answer I can give is 200 grain bullets at approximately 2550 ft/secs. Several powders will achieve this velocity with accuracy.






Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.