The Accurate Reloading Forums
300 ROOK Bullets

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/6711043/m/690100387

22 December 2007, 19:23
m4220
300 ROOK Bullets
Looking for some 80-90 grn lead bullets for reloading for a 300 ROOK or possiblly a mould for casting also looking for more cases for this same cartridge.

m4229
23 December 2007, 05:18
ChopperGuy
I have about a hundred 80 grain 300 rook bullets lubed and ready to go.

If you want them, just PM me your address and I'll let you have them.

I'll try to also locate the info on the guy that makes them in TX. He was kinda old last time I ordered a few years ago so I don't kow if he's still in business.


______________________
Guns are like parachutes. If you need one and don't have one, you'll likely never need one again Author Unknown, But obviously brilliant.

If you are in trouble anywhere in the world, an airplane can fly over and drop flowers, but a helicopter can land and save your life. - Igor Sikorski, 1947
23 December 2007, 06:39
enfieldspares
RCBS used to list a special, heel based, mould (or mold) for this calibre.
23 December 2007, 06:57
0007
Sometimes you can get the correct diameter bullet by not running the cast bullet through a sizing die.