The Accurate Reloading Forums
Need load for 6.5X.284 130gr. Accubond

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/6711043/m/670108837

29 September 2007, 08:43
Erik
Need load for 6.5X.284 130gr. Accubond
Anyone used the 130gr. Nosler Accubond in the 6.5 X .284? I would like some input where to start with powders and seating depth.

Thanks, Lonnie
29 September 2007, 08:52
308Sako
While I have not as yet shot the accubond, I have shot the partitions at 125 grain weight, 27"barrel yielded 3,300 ft/secs with IMR 4831, thought IMR 4350 was more accurate... touch slower for pressure reasons.






Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.
29 September 2007, 09:42
tomo577
check out the current issue of shooting times magazine.
they have a whole article about reloading for this.


TOMO577
DOUBLE RIFLE SHOOTERS SOCIETY
29 September 2007, 10:01
ZERMEL
According to QL your best powder would be H1000
with about 102% loading density. This is a load with a slight compression.


Fred M.
zermel@shaw.ca