06 January 2002, 03:29
<trublu048>T/C Encore 7mm-08
I have purchased a 7mm-08 barrel for my T/C Encore and have not found any factory load to agree with the barrel. I have tried handloading. So far have found it to shoot only fair at the lower listed velocities (2400 fps). The barrel is 24" with a 1-9 twist. The rounds that I have chosen to test are the Hornady 139 SPBT and the Sierra 150 SBTs. Also the powders are Varget,Win 760, and IMR 4060. Primer is the Rem 9 1/2.
I plan to hunt W/T with this gun and would like to get at least in the 2700 fps.
06 January 2002, 04:31
<heavy varmint>Seems a little fast burning but H-4895 workes real good with the Hornady 139spbt in my 7-08. I have had better luck with the faster burning powders so far, about the only slower powder I have yet to try is Reloder 15 and it's on the agenda as soon as the temp. gets above freezing.
06 January 2002, 05:29
dan belisleI had good results in my 7mm-08 with RL 15 and H414. Mine seems to prefer (oddly enough) the 140 Gr bulk bullets from Remington. - Dan
06 January 2002, 08:50
<Big Stick>The only powder I shoot in my 7-08's,is Re-15..............
16 January 2002, 17:00
DannoBooneIt may help to float the forearm with a
couple of faucet washers trimmed down a
little. The holes are so far off on the
forearm for my 25/06 T/C barrel that they
bind the forearm on one side of the barrel,
so I had to do this as well as a lot of
sanding. When it warms up again..........