15 November 2020, 05:28
Bobster.221 Fireball magazines Rem 700
https://www.gunpartscorp.com/products/116612015 November 2020, 18:10
sliversquote:
Ok Bob, so what about a follower? Would a you need to find a .222/.223 follower that is not pressed metal and grind it down to fit? Even when Rems' parts web site was up and running I never found a .221 fireball follower there, but I found the .221 mag box.
15 November 2020, 18:29
eltonThanks for the heads up. PTG makes followers
16 November 2020, 02:41
ColoradoMattAren’t the ejector plungers located in a different spot on the bolt face on factory 221 model 7 and 700 bolts?
16 November 2020, 18:20
Jim Kobequote:
Originally posted by ColoradoMatt:
Aren’t the ejector plungers located in a different spot on the bolt face on factory 221 model 7 and 700 bolts?
Yes they are! You are going to have more problems with that than a Mag box
18 November 2020, 02:51
df06Been there and done that. It’s expensive. Converted a REM 700 223 to 221 fb. It did not feed or eject properly. The extractor and plunger are located in a different place on the bolt, on a factory 221 fb.