The Accurate Reloading Forums
Case forming dies are in

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/6521043/m/992101039

15 September 2008, 19:43
butchlambert
Case forming dies are in
I will start shipping tomorrow. I will contact everybody that I have contact for later today.
Butch
15 September 2008, 20:27
bartsche
thumbroger thumb


Old age is a high price to pay for maturity!!! Some never pay and some pay and never reap the reward. Wisdom comes with age! Sometimes age comes alone..
28 September 2008, 00:07
2RECON
dancing

Got them today......

GUESS what i´m doin now.... Cool

Best
2RECON
28 September 2008, 00:35
butchlambert
I did not enclose instructions. I learned the hard way when I got mine several years ago and now it is second nature.
1. Use the largest bushing that you can first
2. Do not skip a bushing when reducing the case diameter
3. Use a good quality lube[Imperial die wax]
4. To set the length of forming you can do either or both of 2 things.
5. Screw the die holder all the way in. Let your bushing float and screw the nut down until you have the appropriate length.
6. If you are still sizing too much, back out the die holder a little at a time.
Remember these dies are to get your brass close enough for fire forming only. I would be happy to answer any further questions.
Butch