Ruger #1 Kobe chambered.

RIMLESS, 50grain Rem. psp., 14grains DP2200, LC .223 cases, FC primers, oal=1.725"(std oal=1.580"),, Really mild. did not fully fire form. some soot, 2109 to 2160 fps. 10 shot 3/4" group at 50 yds. Second 10 shots 1 1/4" group at 50yds.,?

RIMLESS,60 grain Barrier bullet Hornady. 13.1 grains 4198 compressed, RP .223 cases, Wolf primers, oal= 1.745", 2316 to 2424 fps., 1" group at50yds.,

RIMMED, 52 grain FBHP, Berger, 13 grains
T680, PPU cases, Wolf primers, oal=1.850"!!!!, mild, 2328 to 2556 , POI changes dramaticly with velocity difference.

RIMMED, 52 grain FBHP Berger, 13.5 grains T680, PPU cases, Wolf primers, oal=1.850",2503 to 2660 fps. Deadly when velocity is close. As velocity increased the point of impact rose.The differential between 2503fps. and 2660fps. was 1 1/2". The 7 shots fired were true to form in degree.

To this point the loading has been within published .218 Bee data and the pressure indications seem low. Future loading will be gradually stepped up to get some indicated max. loads. roger

When you get the sooty cases do you increase the charge of that powder or do you change powder type?Good Luck

quote:

Originally posted by plainsman456:
When you get the sooty cases do you increase the charge of that powder or do you change powder type?Good Luck

Some time a little of both, plus make a greater effort to clean lube off the cases. Being in wildcats anealing and neck brass thickness have to be considered. Thanks for the response!! roger

Thanks for telling us about this project.Good Luck with it.