THE ACCURATERELOADING.COM WILDCAT FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
10.75x62?
 Login/Join
 
one of us
Picture of boom stick
posted
Is there a 10.75x62 out there?
There is the 10.75x57 Mannlicher.

I just dug up an old thread on the 404-240 lol. still a good idea AND similar to the 425 Fossdal.

http://forums.accuratereloadin.../4711043/m/647104666

My, how time flies.


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27117 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
one of us
posted Hide Post
I never heard of a 10.75X62, but my .400 Whelen fills that niche admirably, as far as I'm concerned. Smaller bullet diameter (.410" vs. .423"), but greater sectional density.
 
Posts: 1695 | Registered: 27 March 2007Reply With Quote
one of us
posted Hide Post
How about a 10.75x61mm Haenel, DWM case number 523, it's close.

http://forums.nitroexpress.com...=0&page=1#Post340523



Jim
 
Posts: 417 | Location: Winter, Wisconsin, USA | Registered: 19 December 2010Reply With Quote
one of us
posted Hide Post
There is a 10.75x63, that is the same thing as the x68 case with a shorter neck.
 
Posts: 4323 | Registered: 10 April 2009Reply With Quote
one of us
posted Hide Post
http://old.municion.org/ has a 10.75x62 listed for the 10.75x63 G Mauser.

10.75x63 G Mauser / 10.7x62.7 Le Personne / 10.75x62 Le Personne / DWM 515 / SAA 7025 / ECRA-ECDV 11 063 BGC 010


Jim
 
Posts: 417 | Location: Winter, Wisconsin, USA | Registered: 19 December 2010Reply With Quote
one of us
Picture of boom stick
posted Hide Post
Thanks all. this seems to be the closest thing.

quote:
Originally posted by Jgrabow6493:
How about a 10.75x61mm Haenel, DWM case number 523, it's close.

http://forums.nitroexpress.com...=0&page=1#Post340523



577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27117 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
one of us
Picture of dpcd
posted Hide Post
For a new one, go with the 400 Whelen, G&H version; saves a LOT of drama.
 
Posts: 13921 | Location: USA | Registered: 02 August 2009Reply With Quote
one of us
posted Hide Post
I have heard of the 410 OM which is a 9.3x62 necked up to take .410 bullets. Sends a 350 AF down range at 2200ish.
 
Posts: 134 | Registered: 19 September 2016Reply With Quote
one of us
posted Hide Post
Why, are you just bored?? push that reamer in deeper is my advise, the 10.75x68 is a wonderful caliber in a 98 or mod 70 action..duplicates the original 404 balistics...or modernize it with a 350 gr. bullet at near 2400 fps...I used it on Buffalo and it worked as well as anything else at 2360 in my gun with a shorter tube. The black bulls ran off 25 or 50 yards and bellowed in each case..That was in the day without the modern calibers and we had to improvised at times..doubles were wall hangers all of them!!


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 38055 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
one of us
Picture of Big Wonderful Wyoming
posted Hide Post
Wow a 423 bullet on a 30-06 case would be ripe for headspace.

A 9.3x64 case would be pretty sweet thorugh.
 
Posts: 7314 | Registered: 10 October 2012Reply With Quote
one of us
Picture of boom stick
posted Hide Post
quote:
Originally posted by Big Wonderful Wyoming:
Wow a 423 bullet on a 30-06 case would be ripe for headspace.

A 9.3x64 case would be pretty sweet thorugh.


Check your brass but IIRC the 9,3x62 is a few thousandths larger than your garden variety 06 brass.


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27117 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
quote:
Originally posted by boom stick:
quote:
Originally posted by Big Wonderful Wyoming:
Wow a 423 bullet on a 30-06 case would be ripe for headspace.

A 9.3x64 case would be pretty sweet thorugh.


Check your brass but IIRC the 9,3x62 is a few thousandths larger than your garden variety 06 brass.


appears you are correct, after actually checking, CIP calls for .005 and a bit larger for x62


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about the416AR, 458AR, 470AR, 500AR
Order AR/AccRel Brass
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 35898 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
Picture of boom stick
posted Hide Post
Supposed to be a 6 thousandths difference but measured brass actual is key. A 416x62 may be better.






577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27117 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2021 Accuratereloading.com


Visit our on-line store for AR Memorabilia