The Accurate Reloading Forums
500 NE brushes & mops; WHERE TO GET 'EM?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/645100744/m/8831086231

15 May 2010, 05:55
LionHunter
500 NE brushes & mops; WHERE TO GET 'EM?
Well, I need some for a new DR. Particularly nylon brushes. 8x32 thread. Thanks for any help.


Mike
______________
DSC
DRSS (again)
SCI Life
NRA Life
Sables Life
Mzuri
IPHA

"To be a Marine is enough."
15 May 2010, 07:28
BNagel
You're in shotgun territory now, maybe even pistol -- just a thought. Isn't that an Outer's thread?
(I use 20-gauge loading block for .416 Rigby.)


_______________________


15 May 2010, 10:37
Mike Brooks
Look in the black powder front loader area for a 50 cal brush and such.


NRA Life
ASSRA Life
DRSS

Today's Quote:
Give a man a fish and he eats for a day. Give a man a welfare check, a free cell phone with free monthly minutes, food stamps, section 8 housing, a forty ounce malt liquor, a crack pipe and some Air Jordan's and he votes Democrat for a lifetime.
23 May 2010, 04:05
amamnn
I use 8/32 only. I get all my stuff direct from Dewey. They have about anything you'd want and the adapters to make them work with what you have.

http://www.deweyrods.com/cgi-b...atstr=HOME:BRUSH_MOP


If the enemy is in range, so are you. - Infantry manual
23 May 2010, 09:58
MikeBurke
LionHunter,

I searched for a good jag and brushes for my 470 and 450-400. I finally broke down and bought the Parker Hale rod, Kynoch jags, and Kynoch brushes for both. They work like a charm. Trader Keith has them and are nice folks to boot.

Unfortunately I have not seen the nylon brushes from Kynoch.

http://www.traderkeith.com/products.html

Hope this helps.
23 May 2010, 22:54
ozhunter
quote:
Originally posted by Mike70560:
LionHunter,

I searched for a good jag and brushes for my 470 and 450-400. I finally broke down and bought the Parker Hale rod, Kynoch jags, and Kynoch brushes for both. They work like a charm. Trader Keith has them and are nice folks to boot.

Unfortunately I have not seen the nylon brushes from Kynoch.

http://www.traderkeith.com/products.html

Hope this helps.


tu2