The Accurate Reloading Forums
Varget and the 260 Remington

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/6121043/m/75710539

09 October 2002, 07:37
xphunter
Varget and the 260 Remington
Have any of you guys used Varget for the 260 Remington? [Confused]
Good results?
Accuracy?
MV compared to other powders used?
I have just finished putting together some rounds for load development with the 120 grain Nosler Ballistic Tip. It is for a MOA Maximum in 260 Remington (14 inch barrel). It is what my daughter will use for deer hunting this year.
I bought this handgun from my hunting buddy. he had a load developed for a 140 Partition that would group from .5-.6 at 100 yards (3-shot groups). But he forgot to list the powder and he can't remember now what he used. It is good to know it does like 140 Partitions should the need arise to use them. [Cool]
xphunter
10 October 2002, 03:43
deadeyedick
MOA for your daughter? Didn't know that 6 year olds were allowed to hunt. [Big Grin] [Big Grin] [Big Grin]
10 October 2002, 08:13
xphunter
Rich,
My daughter is 13 and my boy is 8. The picture you saw of my daughter at the clinic with 221 fireball xp-100 was when she was shootin dogs 5 years ago.
I love watching her shoot off the bench with a specialty handgun and watch some of the guys do double takes when they look at her target.
First, they are shocked to see a girl shooting a handgun like that and second, they are amazed at the groups she shoots.
My head is so big sometimes I have a hard time getting in the truck.

xphunter
18 October 2002, 12:45
<Cossack>
[QUOTE]Originally posted by xphunter:
[QB]Have any of you guys used Varget for the 260 Remington? [Confused]
Good results?
Accuracy?
XP Hunter,in case the private message didn't arrive:
My record show following: For 15" Rem XPR in 260 Rem. Using RP Brass and CCI
200 Primers

Using 125 Partions and Varget, started at 39 grs (no reading), 39.5 at 2685
fps, 40 at 2709*, 40.5 at 2710, and 41 at 2743 (hot?)

Using 120 Barnes X and Varget, 40.5 at 2730, 41 at 2780* (max) 41.5 2828
(hot!)

*=accurate load

Barnes X set to 2.292 against 2.800 OAL (in my piece)
Nosler set to 2.290 against 2.838 OAL

Rem Factory loads 140 SSP at 2360 fps.

"Get acquainted loads" with 129 Hornady and Varget: 37 grs at 2455, 38 at
2474, 38.5 at 2556, 39 at 2580*(1), 39.5 at 2572, 40 at 2629*(2).

Also used H4350 and 129 Horn 44 to 46.5 grs, started at 2410 and maxed at
2710

Air temp @ 75 degrees.

Figures for my piece, use at your discretion.

Regards. Cossack