The Accurate Reloading Forums
What do you think of this....

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/5621043/m/5231095412

10 October 2015, 11:24
Bakes
What do you think of this....
45-70 case necked down to 9.3 on a SMLE.

No reason just for shits and giggles Wink


------------------------------
A mate of mine has just told me he's shagging his girlfriend and her twin. I said "How can you tell them apart?" He said "Her brother's got a moustache!"
10 October 2015, 11:37
muzza
How bout the 416 Barnes - its based on the 45-70.


________________________

Old enough to know better
10 October 2015, 11:51
Bakes
quote:
416 Barnes

Now that sounds cool as well Muzza


------------------------------
A mate of mine has just told me he's shagging his girlfriend and her twin. I said "How can you tell them apart?" He said "Her brother's got a moustache!"
10 October 2015, 13:06
muzza
the 444 Marlin is probably a better parent case , stronger head design.


________________________

Old enough to know better
10 October 2015, 15:20
Mike McGuire
Same as I said on AHN, 35 calibre. Bullets and you have basically said it is to be a fucking around rifle Big Grin
11 October 2015, 02:42
Bakes
Yeah 35-303 has been done a lot. 9.3 would be different. I've seen SMLE's rebarreled to 45-70 and that's what got me thinking out a 9.3 on the 45-70 case.


------------------------------
A mate of mine has just told me he's shagging his girlfriend and her twin. I said "How can you tell them apart?" He said "Her brother's got a moustache!"
11 October 2015, 04:36
Von Gruff
I have done one of mine with a 405 Winchester case shortened from 2.583 back to 2.410 ( I call it the 400 Lee Speed) and loaded with a 330gn bullet to 1950fps over 46gn 3031 and a really nice plinking load at 1500fps with 20 gn Blue Dot
Holds 5 down in a mag with single stack insert.The 303 I built on top with the 400 lee Speed below




Von Gruff.

http://www.vongruffknives.com/

Gen 12: 1-3

Exodus 20:1-17

Acts 4:10-12


11 October 2015, 04:48
Mike McGuire
quote:
Originally posted by Bakes:
Yeah 35-303 has been done a lot. 9.3 would be different. I've seen SMLE's rebarreled to 45-70 and that's what got me thinking out a 9.3 on the 45-70 case.


I think the 45/70 can be blown out and take the 475 bullet and if so that would give you big pistol bullets. The boys on Big Bores will know.

Or maybe a 45/70 to 41 calibre or to 429. Again all those bullets.

I reckon if you do 9.3 you will end up getting the shits because of the bullet situation. The other problem with 9.3 bullets is they will be designed with a much higher velocity in mind then you get from a 45/70 case capacity and doubly so with pressure limitations of the SMLE.