The Accurate Reloading Forums
223 AI speed question

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/5411043/m/102103753

27 October 2005, 09:48
Mark Dobrenski
223 AI speed question
I am curious have any of you taken a 223, and using the same gun and same tube and tube length taken and punched it to AI? If so what speed have you picked up?

Many thanks

Mark D
27 October 2005, 19:24
iwzbeeman
Don't know but would guess somewhere in the neighborhood of 50fps. If you're lucky.
28 October 2005, 17:29
sdgunslinger
Mark

As you've seen from some of the talk on the campfire , the AI guys will claim a good 200 fpsor so over the plain ol 223 .

I don't doubt they are seeing the numbers they claim , but I don't believe it's the AI treatment getting them there , but the addition of some +P .
28 October 2005, 20:05
iwzbeeman
Its kinda pretty straight forward mathmatically. I THINK the accepted formula is one in four. For every 4 percent of powder increase, you get 1 percent increase in velocity.
I too think some of the claims for the AI's are kinda optimistic.
30 October 2005, 18:21
tom holland
I've got two 223AI both with hart barrels and a factory rem varmit 223 so have a fair knowledge of the gain with the 223AI and 200fps more is a good estimate. I shoot either 50 or 52gr bullets with the 50gr I'm alittle over 3600fps and the 52gr I'm at 3558fps both barrel are 1/14 twist and 26" long. My loading data came out of the varmint hunter article from 1995 and I use V-133 powder and I'm appr 40fps as to there published velocity. I also shoot a 222AI,22-250AI,6mmremAI and have those rifles in factory chamberings. I've never been a big fan of the 223 always had one around but I sure do like the 223AI. I think sometimes when doing an AI case some just work better than others.


VFW