I looking for load data for the 7mm wsm I have just had one built and at present running in with 140 gr Nosler and RL 19

Reloder 17 ????

Never heard of it.

quote:

Originally posted by R Flowers:
Reloder 17 ????

Never heard of it.

"19"

I have a 7 WSM in a Winchester Coyote. 168gr SMK RL22 62.2 grs. Fed Mag Match primer. 180gr. Berger VLD 65.0grs. H1000 same primer. Both shoot to the same point of impact @ 1,000yds. I know I couldn't believe it either! 6 shot groups 8.750 - 8.5" @ 1,000. The RL 22 load routinely shoots 1/2 MOA @ 400 yds. It has shot so well that I haven't had the need to chrono it. Hope this helps

8" groups at 1000 yards is within the "magic" 1 MOA! That's some rifle!!

My 300 wsm Tikka t3 loves the hell outa the reloader-22 68.5 grns@ 2900 fps,win brass federal goldmatch 215 primers and using 190 grn SMKs.

Rootbeer a 7 WSM won williamsport.......maybe it was his?

Howa / Hogue 7mm WSM, Vit N165 63gns under 162gn A-MAX ragged hole 5 rounds 100 mtrs, Hogdon 4831 62 gns under same, 140 gn NOSLER ballistic tip, over 4831 65.5gns, all very tight groups, opening out to one & half inch 200+

Browning X-bolt: 300 WSM
180gr Nosler Protected Partition
64 gr R-17
Winchester Magnum Primers
2.805 COAL

6 shot group. 5 shots w/i 1" with a flier @ 1 1/2" left. Needs more testing and work, but shoots pretty well for the second time out.

quote:

Reloder 17 ????

Never heard of it.


R Flowers

RL-17 has been out for over a year, and was made for the short mags, but also works very well in other calibers.

Browning A-bolt 23"barrel 300wsm:
168Combined Technology
63gr H380
Fed215
2.840coal
5 shot group - 4 touching, 1 shot 3/4" right(couldn't have been my trigger pulling)
Numerous 3 shot group sub-moa

63grs '22,moly 162A-Max kissing lands.

Go over to 6mmbr.com. There is alot of info for you there.