The Accurate Reloading Forums
Need load data for 125 gr. Partition in 6.5 Swede

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4911043/m/78510209

09 November 2001, 06:00
<Royce Gladden>
Need load data for 125 gr. Partition in 6.5 Swede
I would like to see some load data for the
125 grain Nosler Partition in the 6.5x55
Swede. I am interested in the best loads
for both accuracy and velocity. I shoot a
Ruger M77 with a 1 in 8 twist in a 22 inch
barrel. Your help is appreciated.

Regards, Royce

09 November 2001, 06:33
<Umebo>
I dont know if it is of any help, but I use 44.0 grs N204 behind my 123 grs lapua scenars with very good results. The rifle is an old m/96. N203-B is propably also a very good choice, but I have no personal experience with it.

/M

17 November 2001, 17:16
<Daryl Elder>
I had really good results in my Tikka 6.5x55 with H450. Alas, it's no longer available in my neck of the woods, but if you can get your hands on some...
20 November 2001, 12:16
George Semel
I shoot a 125 gr Nosler Partition in my Ultra Light Arms M-24. I just take a Federal 210 primer a W-W case ( Bought a few thousand Cheap) and around 50 gr. of RL-22. Start five grains or so below that and work up. You should find a good load for that Ruger, my ruger just loves 140gr Hornaday SP's You should also look at the 129 gr Hornaday also. I load nothing but RL-22 in my 6.5 x 55 's, Give RL-22 a shot, it will be worth your efforts.