Post up your favorites



Thanks

92 H1000, Rem Brass, F215M, 200 gr AB, 3.60 OAl 3085 FPS,

103 gr. AA8700, Rem Brass, f215M, 200 TSX, 3.645 OAl. 3080 fps.

Thanks Trade!

I'm getting all my stuff together to start shooting this gun

At $50/box for Core Lokts I figure its a good investment to reload this one

Here is a taget shooting both loads at the same time. I shot them at 300 yards using the first line on my TDS the AB was dead center and the TSX a couple inches lower. The Accubond load is the most consistant. I am taking both to Namibia this year.

87 grains of Reloader 25 and the 200Swift........shoots rarely above.4

And 93 grs of N570 with the 200 naturalis shoot beautifully, rarely over .5

Thanks for the info Blair! I will have to try out that swift load !

Bugle, you will love it! I couldn't believe my eyes..........the barrel is a "tight" 308 at .3065, but I think any RUM would love the load. Start at about 85 as I've found that the RE-25 varies a bit from lot to lot..........

96 grains Reloader 25

180 grain Swift A Frame

Primer Remington 9 1/2

three shot group @ 100 yards 5/8"

Remington Model 700 26" barrel stainless

89.0 Re25, 200 grain AB, Fed 215 Gold Medal Match primer, Remington brass.

However, 91.0 Re25 works with the above load when switch brass to Federal.

94.5 Re25, 180 Swift Scirocco, Fed brass, same primer.

rem case cci 250 96 grains Retumbo and 200 grain speer or sierra bullet 3200fps.

rem case cci 250 imr 87 grains imr7828 220 sierra matchking 3050

rem case cci 250 84 grains imr 7828 240 sierra 2850 fps

Start lower and work up that is what I did.

the 200's were shot out of two seperate mod 70 300 ultra classics one stainless and one blued. got the same velocity with the 200 grain bullets.

The rest were shot in the blued rifle.