The Accurate Reloading Forums
416 Rem. Mag. loads

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4911043/m/19110609

19 April 2003, 08:49
Hawkeye47
416 Rem. Mag. loads
I'm looking for loads with 400gr bullets in the 416. Does anyone have a pet load for buff and big bear?
20 May 2003, 18:38
todbartell
My new favorite load is 76.0 grs. H4895 behind a 400 gr. Hornady RNSP. R-P case, CCI 250 Mag primers. Average muzzle velocity from my 24" barrel is 2415 fps. It shoots pretty well. Previously, I was using RL15, but with 78.0 grs., I was getting only 2372 fps. Shoots equally as well as the H4895 load. As always, work up to these loads, they appear safe in my Ruger No 1-H.

[ 05-20-2003, 09:43: Message edited by: todbartell ]
10 August 2006, 13:55
Don_G
I use 77 gr IMR4895 behind any of the 370 gr NorthFork bullets (Soft/Cup Point Solid/ Flat Point Solid).

They print on top of each other at 100 yards.

Winchester Large Rifle primers. Lee crimped at 3.95 COL, R-P brass. 2575 fps from my 23.5" barrel. Average group size .75", best in the threes.


Don_G

...from Texas, by way of Mason, Ohio and Aurora, Colorado!
12 August 2006, 03:13
PRDATOR
Work up to this 80 gr of RL 15 and the 400 gr TSX it shoots .5 for three rounds @100 yds With Iron sites thumb I thoght is was a fluk the first time and thought well maybe on the second time but the third time I just went and loaded up ammo Case life was 5 times on these cases next time Ill trash them at 3-4.
good luck


You can't kill them setting on the couch.