The Accurate Reloading Forums
need a 6BR load..

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4911043/m/187107874

11 May 2006, 21:56
chazgreen
need a 6BR load..
just received my 6BR; 26 inch kreiger barrel with 1:9 twst. want to shoot 70 to 90 grain bullets. this is my first custom built rifle; would really appreciate some "custom advice" yes, i have seen the 6BR web site already. Thanks, Chaz
12 May 2006, 10:47
papaschmud
I'm assuming that you will be starting with the Lapua brass, also I prefer the Fed match primers. That said, mine shoots half minute without trying almost regardless of load. Currently I'm using H335 and 68gr. Bergers, that usually stays in the upper .2's.

Gabe


Gabe

Pa to three sons
Sambone 5
Catcher 3
Heebies 1
Husband to one wife
the Cluck
15 May 2006, 06:24
Jay Johnson
I'm using Lapua brass Federal GM205M primers and Barts 68 Gr FB bullets over N133. Shoots very well.
16 May 2006, 23:00
7mm mashburn
check out www.6mmbr.com great site
19 May 2006, 00:25
chazgreen
Papa and Jay/ thank you. I have H355, as well as varget, H332, IMR 4198, H4895. I have both Fed 205 and CCI BR 4 primers if amyone else has any pet loads/ Chaz