This thing is like my old ZX11 motorcycle, below 6000rpm its a pussycat, above 6 you've got a Tiger by the tail. Recoil is stout up to 2300fps then gets dead serious. At 2500 IT HURTS DESPITE THE BREAK. IT never got uncontrolable and accuracy as judged by offhand shooting was excellent. I shot a number of EXTREMELY Dense oak logs with it at about 25 yrds and the 750 gr Woodleighs drove in about 9 inches and expanded to over 1.5 inch balls. Interestingly, the logs were about 1.5ft in diameter and about 30 inches long. The Nyati split the logs in all cases. For comparison a 500A2 would penetrate to about 13 inches but never split the logs. A .338 Ultramag ,250 gr partitions penetrated the furthest to about 15 inches.
For ha ha's I loaded a 650 gr military .50 BMG bullet in the 500A2 and it made it all tghe way through the log no problem. Proving beyound a shadow of a doubt that solids outpenetrate softs! I used the rifle both open sights and with the 2.5X20mmm Leupold. I had no problems with the scope although I had to concentrate on how I held the gun with the Major power loads. In no case did I have any signs of overpressure and the brass seemed OK. I did not get a headache but I can no longer see the screen so pardon me for any typos!-Rob
Do you think you can get the velocity higer with the 750 grain woodleigh bullet...?
What velocity was it when you shoot in the oak logs...? How much weight does the bullet lose when you shoot in the oak tree...?
Are you going to try the 900 grain woodleig soft point bullets...? what velocity do you think is possible with them...?
How high velocity do you think it is possible with the 750 grain woodleigh bullet...?
What velocity was it when you shoot the tree...?