The Accurate Reloading Forums
Jamison 500 Jeff brass

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/828106969

16 November 2008, 04:33
GarBy
Jamison 500 Jeff brass
Jamison folks informed me that the new run of brass shouls be ready in about 3 weeks. I'm getting some to test as I sent them some once fired Kynoch to compare with CIP, etc. I'm told the Kynoch brass mates up with CIP and the new brass should be nuts on. I know it works perfectly in my Heym, so I can't wait. The black and blue has subsided from my right shoulder and I'm ready to do it all over again! Big Grin

Gary
DRSS
NRA Lifer
SCI
DSC
16 November 2008, 06:04
RIP
Good deal. thumb

I sent Marc Jamison some of the .505 Gibbs brass that A-Square screwed up on the first run of CZ Safari Classic ammo. That A-Square stuff would not chamber in the CZ .505 Gibbs without use of a sledge hammer.

My dealer had to return all his stock of CZ ammo to CZ when I reported that. I got a refund for all but 10 cartridges that I boogered up trying to close the bolt on them. I wanted to save some for posterity anyway.

I had A-Square emailing me, wanting me to send some of the brass to them. But I was so pissed about paying $130 for ten faulty pieces ... I sent it to Marc Jamison instead.

His .505 Gibbs brass worked fine in the CZ .505 Gibbs when I later got 200 pieces of Jamison .505 Gibbs brass for an incredibly low price.

I got 200 pieces of Jamison .505 Gibbs brass for $200 plus $12 S&H. April 02, 2005 price.

I sure hope he charges more now!

200 rounds of CZ .505 Gibbs ammo with A-Square bullets would be about $2600.

Back to Jamison 500 Jeffery Brass:

Either Marc or his able assistant eventually get things right.

A-Square is hopeless.

Is A-Square making 500 Jeffery ammo for CZ?
Or has CZ learned not to bother with A-Square anymore?
16 November 2008, 06:28
GarBy
RIP...not sure about A-Square making the 500 Jeff ammo....I bought 10 rounds of Kynoch from Midway just so I could shoot my new baby. I sent 4 pieces of the fired brass to Marc/Terry for them to look at. They have done their homework on this caliber now, I assure you. I'm getting a few test pieces prior to full blown shipment....very nice of them to do that.
I have a lot of confidence in them getting it all sorted out...their customer service is awesome in my opine.

Gary
DRSS
NRA Lifer
SCI
DSC