470 NE reloading press

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/750104244

10 March 2006, 03:14

470 NE reloading press

I tried to load some bullets for my new 470 and I have an old RCBS rockchucker press. The press is too short for the length of the loaded round. What press can be used for 470 NE
Thanks

10 March 2006, 03:21

JBoutfishn

While there are many "high dollar" presses out there, I found that the Rock Chuckar Supreme for $120Â± works very well.

10 March 2006, 03:37

baboon

Ammomaster then your set for a .50 bmg.

Cry 'Havoc,' and let slip the dogs of war;
That this foul deed shall smell above the earth
With carrion men, groaning for burial.

10 March 2006, 05:07

Jeff Alexander

The Redding UltraMag works for me! You can get one for around 200 from Midway or Midsouth.

Jeff

10 March 2006, 06:06

thornell

The new RCBS rockchukker presses have a larger opening.

10 March 2006, 06:18

zimbabwe

I load on a Rockchucker and it requires you grind away part of the lip on the 470 shellholder. You only need a half circle to gain max pull on the rim. Take a flexible shaft grinder and grind the lip away leading in and you can then slip a loaded round or case with bullet for seating up in the die and slip into the shellholder. Ten minute mod and easier to do and use than it is to say. I've loaded all my 470NE's on such a press rather than buy another one I don't need.

10 March 2006, 07:27

510wells

I (also) went with the AmmoMaster as My Coax was "usable" but a little too short to be comfortable.

10 March 2006, 07:44

MJines

I just bought a Lee Classic Cast Press and it is working great for both 470 NE and 500/416 NE.

10 March 2006, 07:58

Geronomo

I second the Rock Chucker Supreme. Plenty of opening for the nitro express rounds without the long throw of the bigger 50 BMG presses. Besides I kinda like old green.

Geronimo

10 March 2006, 07:58

mstarling

I also use the standard Rock Chucker much as does Zimbabwe as he explains above.

It really ain't hard.

I'm not all that cheap, but after nearly 40 years with this Rock Chucker I really don't see the need for another press.

Mike

--------------
DRSS, Womper's Club, NRA Life Member/Charter Member NRA Golden Eagles ...
Knifemaker, http://www.mstarling.com

11 March 2006, 23:17

baboon

quote:
Originally posted by mstarling:
I'm not all that cheap, but after nearly 40 years with this Rock Chucker I really don't see the need for another press.

Hell I can relate.My Rock Chucker is from the mid 70's.In fact RCBS stuff dont seem to break or where out.I tried to get them to refinish my stuff a year back as the paint job is looking kind of bad.

Cry 'Havoc,' and let slip the dogs of war;
That this foul deed shall smell above the earth
With carrion men, groaning for burial.

11 March 2006, 23:45

new_guy

quote:
Originally posted by MJines:
I just bought a Lee Classic Cast Press and it is working great for both 470 NE and 500/416 NE.

I'll second the Lee.

12 March 2006, 06:30

iamgene

I bought a RCBS Ammomaster for my 470, so far so good, plenty of clearance. Using the Hornady Lock N Load adapter so it's been a snap for the 470 and my service rifle loading. Got a good price from Buffalo Arms.

12 March 2006, 09:07

lb404

quote:
Originally posted by Jeff Alexander:
The Redding UltraMag works for me! You can get one for around 200 from Midway or Midsouth.

Jeff

It is my favorite for big rounds I load.