The Accurate Reloading Forums
.505 Gibbs has arrived

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/7201059302

06 September 2014, 09:19
IanD
.505 Gibbs has arrived
My new CZ550 has arrived!












06 September 2014, 09:49
Use Enough Gun
tu2
06 September 2014, 10:39
RIP
The grain flow in your grip is not the best, I would put a steel rod in the grip:


06 September 2014, 12:08
eagle27
Yes a shame CZ doesn't put a bit more effort into the wood they use in their stocks and I don't think I would be carrying the rifle too far and too often on the sling with that barrel hanger, talk about skimping on metal.

Hope it all works out and the rifle gives good service.
06 September 2014, 19:36
viperidae
Congratulations, there is just something cool about shooting a cartridge the looks like a ICMB!

Check the bedding. The factory bedding on mine wasn't great and needed to be redone.

quote:
Originally posted by RIP:
The grain flow in your grip is not the best, I would put a steel rod in the grip:


An extra long drill bit, some all thread, and JB Weld or bedding material works well. Easy to do and really nice to know that even if it breaks it won't let loose into the side of your face.
06 September 2014, 19:38
chuck375
Congrats! Very cool rifle. I have the CZ Classic in 500 Jeffery and love it. 570g of lead/copper at 2300 fps will get your attention and put a smile on your face.


Regards,

Chuck



"There's a saying in prize fighting, everyone's got a plan until they get hit"

Michael Douglas "The Ghost And The Darkness"
06 September 2014, 20:17
Dan416
Cool. Now the fun starts. I'm on the way to the range today to chrono some 525 TSX's with RL 15 and RL 19.
06 September 2014, 22:18
mete
There was on the forum ,a discussion about early CZ stocks , and the conclusion was on rifles of 375 H&H or more recoil, two crossbolts and glass bedding should be used.
The broken stock should never have been used . If reinforcement is needed should it be a steel rod or wood , and what diameter ?
06 September 2014, 23:39
IanD
quote:
Originally posted by Dan416:
Cool. Now the fun starts. I'm on the way to the range today to chrono some 525 TSX's with RL 15 and RL 19.


Looking forward to hearing your results. Keep us posted and have fun!
06 September 2014, 23:40
IanD
Thanks guys. Never owned anything this big before. Only a 460Wby Smiler
23 October 2014, 04:43
gunslinger55
Ian, can you tell me about the front sight? My 1st Gen 505 is back at triple river getting the "new" style sights because the old ones were very limited and had the spacer on the leaves. Is it a removable front sight? Fiber optic or bead? Size? Hard to get info out of Harlan at TRG. It is free though.

Thanks!


White Mountains Arizona
28 October 2014, 04:00
D R Hunter
May you enjoy it for season, after season, after season... dancing
(Take the smart, experienced guys advice. You will regret it if you don't.)


D/R Hunter

Correct bullet placement, combined with the required depth of bullet penetration, results in an anchored animal...