The Accurate Reloading Forums
CZ & Montana Rifleman

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/48210637

06 March 2002, 18:20
Brett
CZ & Montana Rifleman
Has anyone had work done by this company. The prices are quite reasonable. I'm wondering if they are too reasonable...

Also, has anyone mounted a Williams type receiver sight to a CZ 550 Magnum action? Which did you use and what modifications must be made to the gun to make it fit?

07 March 2002, 02:54
Santala
The old adage "You get what you pay for" applies. I've seen good and bad from Montana Rifleman.

Steve

------------------
Every man dies, but not every man really lives!!

07 March 2002, 08:42
JudgeG
I have a 7x30 Waters barrel by Montanna Rifleman on a T/C carbine. It is a minimum taper bull barrel that is 20" long. It will shoot better than an inch with factory rounds or handloads. The original fit to frame was rough, and they fixed it at their shipping cost. I would deal with them without hesitation in the future.