The Accurate Reloading Forums
woodliegh turned solids

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/4671084621

10 February 2010, 04:06
zhaba
woodliegh turned solids
Hey Guy, Has anyone out there use these new bullets in the rifles yet? I was intrested in putting them through the 404 &/or the 500 Jeffery but wanted to get some feed back before i try them,cheers
10 February 2010, 15:35
jro45
I don't Have the 404 Or the 500 Jeffery. But I do have The 458 Lott And Have not fired the Woodliegh Solids, but have fired the Woodliegh 550 Bullet and It goes 2150 FPS
10 February 2010, 16:06
Pivi
Are they new ? I have the 2009 Woodleigh catalog but they list the protected point , weldcore and FMJ bullets only

Even if their FMJ bullets could have the same behaviour as the monolithic due their very thick steel jacket
10 February 2010, 16:38
buffalo
Michael458 has tested them - look at the terminal bullet performance thread - http://forums.accuratereloadin...4711043/m/2861098911
11 February 2010, 13:48
zhaba
Had a look at that forum but couldn't see the ones i am talking about. yes they are like anew monlithic solid which is what i would like to try in the 500 jeffery more so as a guy i know used the normal woodleigh solids in his and had deformation of the round on his elephant on a front brain shot which i was concerned about.Would use them in a double as that is what they are for so you don't get barrel issues but in the 500 woudl like a bit more?
11 February 2010, 17:26
michael458
zhaba

Terminal Performance thread page #9 has the 400 gr Woodleighs I tested sent by Con. Heavier weights are being sent now and will be tested later.

http://forums.accuratereloadin...043/m/2861098911/p/9

Very good performance.

Michael


http://www.b-mriflesandcartridges.com/default.html

The New Word is "Non-Conventional", add "Conventional" to the Endangered Species List!
Live Outside The Box of "Conventional Wisdom"

I do Not Own Any Part of Any Bullet Company, I am not in the Employ Of Any Bullet Company. I do not represent, own stock, nor do I receive any proceeds, or monies from ANY BULLET COMPANY. I am not in the bullet business, and have no Bullets to sell to you, nor anyone else.
12 February 2010, 14:06
zhaba
Thanks Michael, After i posted this I looked on the web page and to my disappointment found they are not made for the 404 or 500 Jeffery. I will ring and ask the question to see what i can get.never been happy with the barns "X" or solids in my rifles as the grouping has been shocking Frowner
12 February 2010, 14:34
Code4
They don't list 9.3mm versions of this projectile but they are available. Woodleigh doesn't make them, just market them. Ask and you may receive.
12 February 2010, 15:46
jro45
quote:
Originally posted by jro45:
I don't Have the 404 Or the 500 Jeffery. But I do have The 458 Lott And Have not fired the Woodliegh Solids, but have fired the Woodliegh 550 Bullet and It goes 2150 FPS


Yes they are new as far as I know.
14 February 2010, 17:06
500N
Yes, I fired a couple through my WR 500/465 Double this year
as they (Woodleigh) wanted a couple of recoveries from DR's
so they made some up.

All reports I have heard from people who have tested / used
them have been good.

From my perspective, they Killed well, did they were supposed to,
worked as expected.

I'd use them in any of my guns including my DR's once I had
slugged the bores to make sure the gun's bores were the correct diameter.

I don't have any photos of the recoveries as they went back
to Woodleigh.

PS - I don't think 465 is a listed bullet diameter ATM but
I think it will be in the future.