01 January 2006, 21:18
WVFred450/400 3 1/4" loads
I have bell brass and 400 grain woodleighs and wondered what loads works for you guys?I need it to regulate in a double rifle too.
Thanks in advance, Fred
01 January 2006, 21:52
JudgeGIf you wish, I'll copy and fax (or e-mail) the A-Square manual page for the cartridge.
01 January 2006, 22:27
Mickey1You are not regulating the rifle, hopefully that has already been done by the maker. You are making a load that shoots to the regulation. Symantecs but important for understanding.
This is my load.
Rifle: Alex Henry
Bullet: 400 grain Woodleigh
Charge: 81 grains IMR 4831
Primer: Federal 215
Velocity: 2125 fps
Group: 1/2" @ 50 yards
this is from Ray Atikinson.
Another good load is 71.5 grs. of RL-15 with 3 grs. of dacron and a 400 gr. bullet...For the 3" version just leave the dacron out....Fed 215 and Bell, RWS cases....
Welcome back Judge.

01 January 2006, 22:43
WVFredThanks Mickey,
I should have been more clear.I meant so it would shoot to the rifles regulation.
Thanks Fred
02 January 2006, 06:06
Dave JamesI use Ray's load and Mickey's ,,but at 80 grains,
If you contact Bill @ BIll's Accuracy SHop on the estern shore of Maryland he has some loads worked up, also,, both smokeless and BP
02 January 2006, 06:24
RustyIs this a new or old rifle?
I would suggest that you use RL-15 plus filler in an older Cordite proofed rifle.
Here is a link to the article that elaborates on the process.
Reloading the Nitro Express02 January 2006, 07:13
WVFredThanks guys,
Rusty it is an Army & Navy made in 1905 proofed for 60gr cordite 400gr max.
Fred