Left-hand CZ arrived

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/4541044301

17 February 2009, 06:53

Bitterroot

Left-hand CZ arrived

Our left hand CZ 375's came in today. A couple small differences between them and the right hand model. The bolt knob does not have the big hole in the end for one. Wish they would do that on the right-hand models. We have left hand 3-position safeties and stocks made and the first one is getting its facelift beginning tomorrow.

17 February 2009, 07:00

Fjold

That's good news! Can you post a picture or two?

Thanks,

Frank

"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite

17 February 2009, 07:26

AfricanHunter

quote:
Originally posted by Bitterroot:
Our left hand CZ 375's came in today. A couple small differences between them and the right hand model. The bolt knob does not have the big hole in the end for one. Wish they would do that on the right-hand models. We have left hand 3-position safeties and stocks made and the first one is getting its facelift beginning tomorrow.

I am still waiting for someone to give a definative answer on the action size. Is it the big Mag action than handle the .505 or is it an opend up .30-06 action?
I wrote CZ 2 weeks ago, not a peep out of them fopr an answer.

Thanks.

17 February 2009, 07:47

Bitterroot

AfricanHunter, it is the full length Magnum action. A 505 would work, or better yet,a 600 Overkill.

17 February 2009, 09:57

cmfic1

Are these LH CZ's spoken for?

Rod

--------------------------------
"A hunter should not choose the cal, cartridge, and bullet that will kill an animal when everything is right; rather, he should choose ones that will kill the most efficiently when everything goes wrong"
Bob Hagel

17 February 2009, 12:43

yzm19

would these actions be able to take a 416 and 450 rigby???
where would one get such actions??

17 February 2009, 15:24

Bitterroot

cmfic1, we have one rifle left. The LH's are only being produced as complete rifles; "actions only" are not available at this time. We can make any caliber up to 600 OK on the action.

17 February 2009, 20:10

AfricanHunter

quote:
Originally posted by Bitterroot:
AfricanHunter, it is the full length Magnum action. A 505 would work, or better yet,a 600 Overkill.

Thanks,

AH

17 February 2009, 22:55

MikeBurke

quote:
We have left hand 3-position safeties and stocks made and the first one is getting its facelift beginning tomorrow.

I hope mine is first.

18 February 2009, 05:25

Bitterroot

G. Hansen, no it won't. We use the right-handed 3-position safety for right hand rifles.

Mike, you da man. Numero uno.
You're also the Guinea Pig. Somebody has to blaze the trail.

18 February 2009, 06:39

Sevens

Mike, what are you having done to yours?

____________________________

If you died tomorrow, what would you have done today ...

2018 Zimbabwe - Tuskless w/ Nengasha Safaris
2011 Mozambique - Buffalo w/ Mashambanzou Safaris

18 February 2009, 07:45

MikeBurke

quote:
Originally posted by Sevens:
Mike, what are you having done to yours?

3 Position safety
AHR trigger
Straighten the bolt handle
Re-crown barrel
Install barrel band sling mount
Install custom banded front sight with hood
Change factory recoil lug on barrel to AHR lug
Glass bed action
Gunkote all metal
Masterpiece rear sight

Should be a nice dependable rifle for Africa.