Pictures of the .600 Overkill

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/37010157

15 August 2002, 08:50

<BigBores>

Pictures of the .600 Overkill

Bear,

Others may ask...Is that a fixed or removable brake? Or can it be had either way?

15 August 2002, 10:52

D Humbarger

BigBores I use 11/16x24 tpi or 3/4x24 tpi for .50 caliber. I'll use 7/8x24 for the 60 & 70 cal [Eek!]

that I wager is on the horizon.

[ 08-15-2002, 23:29: Message edited by: Bear Claw ]

15 August 2002, 10:58

500grains

Bear Claw,

Can you make that brake the same diameter as the barrel? These .620 barrels will be 1.00 at the muzzle.

15 August 2002, 12:46

D Humbarger

Yes sir thats a piece of cake.

15 August 2002, 12:54

Good looking break Bear Claw. The break I have had made for my .585 has 70x3mm holes angled 20 degrees forward in an attempt to adress the noise issue. A couple of people on this forum have said that the holes are to small, I tend to agree but I will wait & see how it works as it is removeable with thread cap. I might have to get one off you in the future for my .585.