I finally got some brass to try the nitro Express , but load data , especially at reduced levels ,is nowhere in my books ! Does anybody have some handy ? I do have two moulds for a 50/70 Govt. and would like to try cast bullets too , any recommendations ?? Thanks a lot in advance , J�rgen

Using American powders, the regulating loads for double rifles in Graeme Wright's book are a good place to start, as follows:

.500 x 3-inch Full Nitro:
570gr jacketed bullet, 106gr H4350, 2100 fps.

.500 x 3-inch Nitro-for-Black:
440gr jacketed bullet, 72gr Varget, saddle-felt wad (polyurethane packing-foam wad OK), 1920 fps.

The light-nitro load may be OK as a light starting/practice load, but may not regulate in a full nitro double. In a single it doesn't matter as much of course.

Hope this helps.

Marrakai: Now that was quick .....thanks a lot ! I`ll use Finnish Vihtavouri powders and will look for comparable burning rates to start with ! My rifle is a TCR Single Shot , so regulating doesn`t matter at all.Thank you very much , mate !