Hi Hubel!

I have some question about your .700 HE
What velocity will it do with a 26-28 inch barrel with a 1000 grainer or a 1200 grainer 1800 grainer???

Thanks!

//Overkill

Overkill--1000 gr bullet and 320 gr compressed load of ball powder--26 inch barrel,2940 fps-- 28 inch barrel 3000fps--30 in,3060 fps--32 in, 3120fps.

For the 700 HE Long add 180 fps.I use at least 32 in barrel to get the energy out of the loads and have extra weight for taming recoil.Ed.

Hubel, that's bigger than Saddam's big gun!

Hubel !

I'm longing to see some of the rifles built for these awesome cartridges of yours !
What action,,what weight,,and what recoil will these have

Ed,
I saw on another thread somewhere you said 3400fps was possible with 1000 grain and one of your cases. Have you acheived this or just estimated?

Karl.

Hubel458!

I would like to see pictures of a .700 HE Do you have one? How long barrel? What velocity is possible with a 1200 grainer. Hawk bullets will make them.

Thanks!

//OK

Hubel458!

If you have any pictures please send to my e-mail, the adress is robert.uusitalo@home.se

Per577--The 700HE and 700HE long will need
BMG size actions.They will have to be over 22 lbs weight,Recoil will be a little over 200
ft lbs.

Karl-My 700HE Long will get to about 3400 in a
36 in barrel.That figure is from the formula that
I posted earlier, and it is very accurate math.
Within 2%,.Picture of Long is below.

Overkill here is the picture.1st is a 458Win;
2nd is a 458 HE; 3rd is a 550 HE; 4th is the
700HE Long(4.27 in case}; 5th is the 700 HE(3.85
in case); 6-7-8 are shorter case versions.Ed.

Ed, when you turn your cases, do you polish them afterwards? I made a jig for my big lathe for the 4 bore cases that seems to be working fine, but the finished surface isn't quite what I'd like.

Ed,
Remarkable.I did not realise it was such long brass.Just what brass is it?
Sorry if you've gone over it already but I have not been keeping up to date.

Karl.