The Accurate Reloading Forums
Brockman pop up peep

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/2421069551

20 May 2011, 20:19
jsl3170
Brockman pop up peep
Has anyone used one? Pro/con?

Thanks!

Jeff
20 May 2011, 20:23
eezridr
Yes, Two guns (416 Rem and 375 Wea.) They work fine.
20 May 2011, 20:26
jsl3170
How high can the pop up go; it's advertised as elevation and windage adjustable.

full confidence in the spring that controls the pop up peep?
20 May 2011, 22:19
BaxterB
YEs I have used one but recently sold it. Depending on your setup it may or may not work. IN my case, it worked OK with my fixed 4 power scope, but with a variable it did not work because the power adjustment ring hit the peep and there was not enough clearance. One size most definitely does not fit all.

It is windage and elevation adjustable. There is a very small spring kind of captured that pushes the peep up. I changed to a Talley and of course that begins the new problem of finding a good place to store the peep when not in use, but I like it better overall.

Good luck.
20 May 2011, 22:20
jsl3170
the scope will be one of the VXIII 1.5-5s
20 May 2011, 23:23
eezridr
That is what I have on a Win mod 70 (416 Remington). No issue with mine.
It is a 30 MM tube that has an illuminated reticle.
21 May 2011, 04:35
Camdog
I have one on a Lott and love it. The rifle is a Model 70.
21 May 2011, 08:00
BaxterB
I would suggest doing some measurements with your ring etc first... I used Talley rings in custom bases by MArk Stratton. The ring spacing is wider than I wanted and I think that was most of the issue, still, don;t assume it will just work first out of the chute.

Good LUck
23 May 2011, 17:37
jsl3170
thanks all. think i'll contact brockmans directly and ask them.

much appreciated.