Priming tool for 375RUM?

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/23510487

31 March 2003, 13:07

Dan 375RUM

Priming tool for 375RUM?

My LEE AUTO-PRIME will not fit a 375RUM case. Which priming tools would you recommend?

31 March 2003, 13:57

jnc91

Had the same problem with the autoprime and my 450/110 cases today. I fixed the problem by opening up the top of the autoprime with a round file. Just open up the entire circumference of the top with the file until the case is properly centered over the priming plunger. Take it slow and be sure not to remove too much metal in one place.

Good luck,
Jeff Collins

31 March 2003, 18:15

RMiller

I opened my lee auto-primer up also. It didn't take much to do it (I didn't have a file so I used a pair of tin snips a little off each side).

01 April 2003, 16:57

<ovis>

Dan375RUM,

I use the RCBS, works fine with mine.

Joe