HEYM / Swarovski Promo

25 January 2017, 01:58

new_guy

It's been a few years since we've run this promo, but the release of the new Swarovski Z8i makes the timing perfect.

Great rifle... paired with a great scope... at a price that can't be beat.

This is a limited time and quantity offer.

Email or phone us with any questions.

25 January 2017, 02:47

Texas Blue Devil

I sure wish you guys made it in 450 Rigby.

That is a great looking rifle!!!!!

25 January 2017, 02:51

new_guy

quote:
Originally posted by Texas Blue Devil:
I sure wish you guys made it in 450 Rigby.

That is a great looking rifle!!!!!

You are in luck!

We do make it in the 450 Rigby.

25 January 2017, 21:56

new_guy

You probably don't want one of these on your 458 Lott or 450 Rigby, but it's certainly practical on your 375, 416, 404, etc...

Swarovski has hit a home run with the new BTF Turret.

1) It's easy-on, easy-off (with the push of a button.)
2) The "clicks" are very positive.
3) It's only a little taller than the standard turret cap.
4) You can adjust the individual rings noting yardage, or they will custom laser engrave one for your bullet, caliber, etc...
5) The turret has a positive "lock" to prevent it from being accidentally turned.

I can't say we condone shooting every animal at 500 yards, but there is no doubt that practice at 300, 400 and even 500 will make you a better shot at 100 and 200.

With today's laser rangefinders being so inexpensive, you can dial in a 375 and shoot reliably to 200 or 300 yards.

The 375 (and even the 404 and 416) have the energy and trajectory to take big game at extended ranges.

For a little extra, you can add one of these to your HEYM "Express" / Swarovski Z8i package.

26 January 2017, 09:21

Texas Blue Devil

quote:
Originally posted by new_guy:
quote:
Originally posted by Texas Blue Devil:
I sure wish you guys made it in 450 Rigby.

That is a great looking rifle!!!!!

You are in luck!

We do make it in the 450 Rigby.

Will you be bringing any 450's to Vegas??

26 January 2017, 16:58

new_guy

We will have 375s, 416s and 404s at SCI.

The 450 is now in regular production, but I have none in inventory. Figure about 6 months for delivery.

26 January 2017, 17:38

Jager01

is it possible to get the rifle in 9.3x62?

26 January 2017, 19:07

Clan_Colla

quote:
Originally posted by Jager01:
is it possible to get the rifle in 9.3x62?

No Sir.

The SR21 and SR 30 are made in that great chambering.

26 January 2017, 20:10

new_guy

quote:
Originally posted by Jager01:
is it possible to get the rifle in 9.3x62?

We have a limited focus in calibers primarily because each action and magazine box is cartridge-specific.

That means that the (1) feed rails and (2) magazine box for each action are CNC machined with a specific profile that is geometrically optimized for the feeding of that particular caliber.

So a 375 action and bottom metal could not be rebarreled to a 404 or a 416, etc...

The good news is that we don't have to "blacksmith" (cut, grind, weld, polish) a "one size fits most" action or bottom metal to make them feed. They come out of the CNC and run perfectly. Again, because of the correct geometry being machined.

Here is an action view from the bottom that shows a 375 H&H profile machined into the bottom of the action.

Here you can see how the magazine box perfectly fits or "hugs" a stack of 404s.

No one else in the market is doing this today, and the results speak for themselves.

Run 5 rounds through a HEYM Express, and you'll see that the feed like they are running on greased ball bearings!

26 January 2017, 22:06

Heym SR20

Beautiful,

Now please do a mirror image and make a nice left hand 375h&h.

27 January 2017, 08:11

Texas Blue Devil

quote:
Originally posted by new_guy:
We will have 375s, 416s and 404s at SCI.

The 450 is now in regular production, but I have none in inventory. Figure about 6 months for delivery.

We will be in Vegas on Saturday. I'll drop by to fondle the 416s and 404s.

27 January 2017, 22:32

TREE 'EM

I handled one in 375 and liked it, but it's a little heavy for my tastes. I wish it weighed 2 1/2 lbs less

27 January 2017, 22:54

Big Wonderful Wyoming

Wow, can't wait to handle one in Dortmund next week.

Please tell me you are not using Talley mounts?

28 January 2017, 00:24

McKay

They look like Talley's to me? What is wrong with them? More of my guns where them than anything else.

28 January 2017, 04:16

Jager01

quote:
Originally posted by new_guy:
quote:
Originally posted by Jager01:
is it possible to get the rifle in 9.3x62?

We have a limited focus in calibers primarily because each action and magazine box is cartridge-specific.

That means that the (1) feed rails and (2) magazine box for each action are CNC machined with a specific profile that is geometrically optimized for the feeding of that particular caliber.

So a 375 action and bottom metal could not be rebarreled to a 404 or a 416, etc...

The good news is that we don't have to "blacksmith" (cut, grind, weld, polish) a "one size fits most" action or bottom metal to make them feed. They come out of the CNC and run perfectly. Again, because of the correct geometry being machined.

Here is an action view from the bottom that shows a 375 H&H profile machined into the bottom of the action.

Here you can see how the magazine box perfectly fits or "hugs" a stack of 404s.

No one else in the market is doing this today, and the results speak for themselves.

Run 5 rounds through a HEYM Express, and you'll see that the feed like they are running on greased ball bearings!

Can you share pics of the 375 in natural light and in profile...I was about to get a holland and holland .375HH but I am just a sucker for German guns....

28 January 2017, 06:37

Clan_Colla

Chris is enroute to SCI,so,he may be a bit slow to respond.
We will have several Heym Martini guns there.
They are quite hansome guns.

28 January 2017, 07:11

Rockdoc

quote:
Originally posted by Clan_Colla:
Chris is enroute to SCI,so,he may be a bit slow to respond.
We will have several Heym Martini guns there.
They are quite hansome guns.

They are beautiful.

I am impressed with the new double and the magazine rifles.

The magazine of that Express magazine rifle is proper!

29 January 2017, 21:01

new_guy

quote:
Originally posted by Jager01:
Can you share pics of the 375 in natural light and in profile...I was about to get a holland and holland .375HH but I am just a sucker for German guns....

Do you mean the 375 cartridge or the rifle?

29 January 2017, 22:07

Jager01

The rifle when you get a chance, not that many good pictures out there on it.

30 January 2017, 05:23

new_guy

quote:
Originally posted by Jager01:
The rifle when you get a chance, not that many good pictures out there on it.

Hello, Jager. I would suggest taking a look at the website.

1) there are several photos of the rifle, action, parts, close ups, etc... on the "Express" page.
https://www.heymusa.com/rifles/express.html

2) Under the "Media" section, you will find several articles with photographs there too.
https://www.heymusa.com/media.html

We are in Vegas for the next week at SCI, so getting photos in natural sunlight will be delayed a bit.

30 January 2017, 06:25

bradhe

I bought one of the first 375s for my son. Very nice rifle for the price, and (a rarity today) DG ready out of the box

30 January 2017, 08:47

Jager01

quote:
Originally posted by new_guy:
quote:
Originally posted by Jager01:
The rifle when you get a chance, not that many good pictures out there on it.

Hello, Jager. I would suggest taking a look at the website.

1) there are several photos of the rifle, action, parts, close ups, etc... on the "Express" page.
https://www.heymusa.com/rifles/express.html

2) Under the "Media" section, you will find several articles with photographs there too.
https://www.heymusa.com/media.html

We are in Vegas for the next week at SCI, so getting photos in natural sunlight will be delayed a bit.

No rush, I will delay the talks with H&H until I see your post! enjoy Vegas.

30 January 2017, 09:27

medved

quote:
Originally posted by Heym SR20:
Beautiful,

Now please do a mirror image and make a nice left hand 375h&h.

lefties has always been put aside ...

11 February 2017, 23:23

drongo

quote:
Originally posted by TREE 'EM:
I handled one in 375 and liked it, but it's a little heavy for my tastes. I wish it weighed 2 1/2 lbs less

What does one weigh in 416 rigby

12 February 2017, 18:51

Jaglav

My Heym Express .416 Rigby weighs 11.5 pounds with the scope.

15 February 2017, 08:41

Texas Blue Devil

quote:
Originally posted by drongo:
quote:
Originally posted by TREE 'EM:
I handled one in 375 and liked it, but it's a little heavy for my tastes. I wish it weighed 2 1/2 lbs less

What does one weigh in 416 rigby

Awesome rifles!!!! I nearly bought a 416 Rigby (or 404 Jeff) at SCI on Saturday, but my son dragged me over to book a buffalo hunt, and before I knew it the show was closing. Next year.