The Accurate Reloading Forums
Found a few, need help on a few

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4321043/m/8181070632

20 October 2017, 21:09
richj
Found a few, need help on a few
The one after the rf shotgun is .280x1.290 (7mm?)





headstamp
30x865 = unmarked
rf shotgun = W
280x1.290 = 55 N
.318/8mm rf = US
40/65 = C C C
350 G&H Magnum = Western
45 BASIC = RCBS
370x1.25 = TW 53 and TW 54
20 October 2017, 21:13
ZW
The one with the green wood bullet is a .30 caliber M1 carbine blank.
Zac
20 October 2017, 21:19
ZW
The one labeled 30x.865 is an 8mm Nambu . The one labeled .318/8mm. Is a .32 long rim fire. The two labeled .370x1.25 I don't know. If you could supply more measurements maybe I can find out. Or you could sell me one of them and then I could measure it.
Zac
20 October 2017, 21:20
richj
Thanks. I have a 44/40 wooden bullet too. I have an 8mm Nambu T14. I should have thought of that.
20 October 2017, 21:22
ZW
The two with red paper hulls are both 9mm rimfires most likely made by Winchester. If so they will have a "W" headstamp.
Zac
20 October 2017, 21:25
ZW
I did not notice earlier your listing of headstamp below the picture. Now with that info. I know the two on the far right are both made out of old military 30-06 cases. I am still not sure what they are though.
20 October 2017, 21:28
richj
I thought 357 Bane and Davis or an Automag cartridge
20 October 2017, 22:02
ZW
The Bain & Davis would be a rimmed case. My 357 auto mag has a case length of 1.30". So I would say that may be correct.
Zac
22 October 2017, 05:42
richj
found 1 more, a 41 LDA by Peters

Long Colt Double Action it seems.