The Accurate Reloading Forums
Looking for swage press

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3621043/m/9641080111

10 June 2009, 16:30
James Kain
Looking for swage press
I m currently looking for a swage press. Brand new they run about $600. So if anyone has a used one I would be more then happy to help make room in your shops/storage.
Thanks!


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
10 June 2009, 23:49
iiranger
Richard Corbin, rceco.com, has a swaging only press for $250 (plus ship of course)... if it is big enough. Mr. Blackmon has one with dies for about that. Good luck on the "used" search. Sometimes they appear on ebay and Dave Corbin, corbins.com, has a "used section."
11 June 2009, 04:16
Idaho Sharpshooter
the new Walnut Jill will also work to reload ammunition on. Sooo, buy one and be able to load all the way to 700AHR as well as swage the bullets for it.

Rich
Buff Killer
11 June 2009, 04:31
James Kain
Can I use Dav corbins dies in those?


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
11 June 2009, 10:12
cv1973
yes with a adaper,that is how i use my walnut hill with corbin dies.
i think the adapter are 45.00
11 June 2009, 17:52
James Kain
Who sells the adapters? Which corben dies are you talking about? I would like to buy david corbins dies.


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
12 June 2009, 09:24
cv1973
i use dave corbin s dies in richard corbins walnut hill press.richard corbin sells the adapters.
12 June 2009, 09:50
James Kain
thumb Great news! Thats going to save me a shit ton of cash! thanks!


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
13 June 2009, 23:08
iiranger
FYI, there are two Corbin brothers and they used to be partners (??) worked together anyway. They had a difference of opinion. (Surprise... Cain and Able???) and split.

Dave is at corbins.com/swage.com and other web addresses.

Richard has one I know of, rceco.com.

Yes, with some adapting their equipment interchages.

There are other sources of dies, Deutsch, Neemi, Ch4d.com, Hollywood, etc. depending on what you intend. Mr. Blackmon has a very good rep. Addresss in Gun Digest Annual directory. No web site I know of.

Not for the impoverished or weak of will, but if you think you can then do... Luck.