THE ACCURATERELOADING.COM BULLETMAKING FORUM


Moderators: Canuck
Go
New
Find
Notify
Tools
Reply
  
Video Of Our 150 Gr 0.308 Caliber Bullet
 Login/Join
 
Administrator
posted
150 gr Walterhog Solid

The video is of our 150 grain solid.

The target was actually shot with the exact same bullet, but with a hollow point.

Same program, I only disabled the drilling part, as someone asked for solids, when I took the video.

It is not something I like to do very often, as I have to disable the coolant, so that I can take a video.

I run the machine at a slower speed, then adjust it in software to normal speed afterwards.

I do this to avoid damage to the cutting tools.

Rifle was a Robler Titan 6.

Load was 47 grains of VARGET and Federal 210M primers in RWS brass.

5 shots at 100 yards in our underground shooting range.


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 56569 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
one of us
Picture of Buglemintoday
posted Hide Post
Cool video Cool
 
Posts: 3146 | Location: Permian Basin | Registered: 16 December 2006Reply With Quote
one of us
posted Hide Post
Fun to see.
 
Posts: 3506 | Location: Sweden | Registered: 02 May 2009Reply With Quote
one of us
Picture of packrattusnongratus
posted Hide Post
Thanks Saeed. I still do .224 jacketed, 357 lead, and .429 jacketed bullets from Corbin dies. Your bullets are the bee's knees. Be Well, Packy.
 
Posts: 2064 | Registered: 28 May 2002Reply With Quote
one of us
posted Hide Post
Saeed, I would think in Dubai that automobiles rusting is a problem. If you know someone that does auto body work, they could use those filings from your lathe. Body putty comes in two parts--the putty and the hardener. If you mix those filings in the putty and then add the hardener it will fill a large hole easier than putty alone. It can be sanded easily.
 
Posts: 3237 | Location: san angelo tx | Registered: 18 November 2009Reply With Quote
one of us
Picture of waterrat
posted Hide Post
Outstanding Video,,very cool,,Thanks!


I tend to use more than enough gun
 
Posts: 1303 | Location: lake iliamna alaska | Registered: 10 February 2005Reply With Quote
one of us
posted Hide Post
Great video, Thanks. Brian
 
Posts: 2949 | Location: Kamloops, BC | Registered: 09 November 2015Reply With Quote
one of us
posted Hide Post
Nicely done. Will you use that bullet to hunt ?
 
Posts: 745 | Registered: 25 February 2009Reply With Quote
Administrator
posted Hide Post
quote:
Originally posted by clayman216:
Nicely done. Will you use that bullet to hunt ?


Yes.

This is the same basic design I made years ago.

I make all calibers from this design, and have hunted with them extensively.

Others have taken them all over the world.

They work very well, just any of the commercial mono metals.

If anyone tells you any kills better than others, he is lying! rotflmo


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 56569 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
one of us
posted Hide Post
Yes that sounds right. Since I have been using the Barnes TSX I have become a believer. Well built Monos are as good as it gets in my opinion.
 
Posts: 745 | Registered: 25 February 2009Reply With Quote
one of us
posted Hide Post
I don't know about that bullet but I sure would like to have that machine plus the knowledge to use it!


what does it cost to make each bullet?
 
Posts: 143 | Registered: 11 December 2020Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2021 Accuratereloading.com


Visit our on-line store for AR Memorabilia