The Accurate Reloading Forums
32-40

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3621043/m/7831016032

24 March 2017, 09:44
lawndart
32-40
I have a box of that John Wayne ammunition that Winchester made in 1983-1984. The cup, core and cannelured bullet weighs 165 grains, and I have all dimensions for it. My wife and I have a corbin H shaped swager (also good for loading 50 BMG) on a heavy stand that you, 'er stand on.

Question me this:
At the low velocities that this bullet travels, it probably doesn't need to be bonded. Is there a market for this bullet? It is much more accurate than an all lead pill. I would sell these at #50/box. Any ballpark ideas on what I might charge. I would need to also pay for a Corbin power cannelure tool.
Thanks. Would bonding be worthwhile in people's minds?


24 March 2017, 17:47
The Dane
http://www.hornady.com/store/32-Cal-.321-170-gr-FP/
24 March 2017, 23:46
lawndart
I will check them out. These bullets do not need a secant ogive, but the mass of the bullet is close to ideal. Maybe I just dodged a lot of work. I will see how they perform. Thanks for posting your response. I used to live in Karup between Viborg and Herning on the Jutland peninsula. I was flying F-16s at the Nato base there.


06 May 2017, 03:57
Bill/Oregon
As a former Corbin swaging junkie, I would not worry about going to the trouble of bonding core and jacket for a .32-40 bullet.
A nice, firm cannelure and you should be golden. I had the manual cannelure tool from Dave Corbin and much preferred the C&H.
Did you ever overfly the Åland Islands? Wife's people are from there.


There is hope, even when your brain tells you there isn’t.
– John Green, author