The Accurate Reloading Forums
Older Brenneke 16ga Slugs Needed

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/335105333/m/9271082102

07 June 2014, 08:33
luv2safari
Older Brenneke 16ga Slugs Needed
I'd like to find a small supply of the old style 16ga Brenneke slugs, not the new "Magnum" plastic-hull version, for use in my drillings.
07 June 2014, 16:18
9.3 X 75R
Do you need the 2 3/4 or 2 1/2? Reason I ask is that the 2 1/2 are slowly becoming available again from Brenneke.

Other than that, I can't help.


DRSS: E. M. Reilley 500 BPE
E. Goldmann in Erfurt, 11.15 X 60R

Those who fail to study history are condemned to repeat it
08 June 2014, 04:38
luv2safari
Either, just not the magnum ones that seem to be all that's offered now.
08 June 2014, 16:54
9.3 X 75R
I wouldn't think the 2 1/2 in. hulls Brenneke is once again offering to be Magnum as they started making them again for all the old, 2 1/2 chambered drillings, combination guns and double guns. They are however plastic.

The only two places I can think where you might even get a lead on some are the following:

http://www.doublegunshop.com/forums/ubbthreads.php

There is a German and Austrian forum on the above board. and:

http://www.germanguns.com/upload/forum.php

If it is known about German firearms and ammo someone on the above board will know it.


DRSS: E. M. Reilley 500 BPE
E. Goldmann in Erfurt, 11.15 X 60R

Those who fail to study history are condemned to repeat it
09 June 2014, 07:30
luv2safari
They regulate well in my Triebel drilling at the right barrel. I am about out of them (3 left).

The Remington Managed Recoil Sluggers work great in my 12ga guns, but they don't load them in 16. Frowner
09 June 2014, 17:14
9.3 X 75R
Wow...nothing like being up against it. Hopefully someone on one of those two sites can help and point you in a direction. Wish I could be of more help luv.


DRSS: E. M. Reilley 500 BPE
E. Goldmann in Erfurt, 11.15 X 60R

Those who fail to study history are condemned to repeat it
12 June 2014, 02:02
SFRanger7GP
I have been getting Brenneke Classic slugs from either Cabelas or Cheaper than Dirt. I emailed Brenneke and they told me the Classic is made like the original as far as pressure and velocity.

Have you tried the standard Remington or Federal lead slug? They all shoot about the same from my Krieghoff drilling so I am guessing the velocity is similar in all of them.
12 June 2014, 08:56
luv2safari
The only "Classic" brennekes I see these places are the magnums with the classic slug. These are a bit more "severe" than I like to shoot in my drillings; having new hinge pins made and fitted is expensive.

I have tried the standard Remington and Federal slugs. While they regulate pretty well, they aren't nearly as accurate as the old style Brennekes. They are effective out to about 60 yards, IMO. The Brennekes shot tighter at 100 yards than the domestics at 60 yards. Even the US standard velocity slugs are hard to find; everyone needs "Magnum" everything. hilbily
15 June 2014, 02:01
Vol717
The newly imported Brenneke 2.5 inch slugs are the old traditional style slug. Several distributors have them now. They cost about $10 for five.


Quick, Cheap, or Good: Pick Two
15 June 2014, 09:14
luv2safari
Thanks! I found a dealer with them for about $8.50/box-5.

http://www.ammunitiontogo.com/.../cName/16-gauge-slug

I appreciate the heads up. I didn't know they were making the 2 1/2" again. dancing