The Accurate Reloading Forums
9.3x66 loading info

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3221043/m/990109088

22 June 2008, 15:48
wombat
9.3x66 loading info
Just back from the range with some chrono.data on my 9.3x66.
Please be aware my rifle is custom made with a custom chamber and appears to produce higher velocity at any given charge than the factory rifles.I was working from the VihtaVuori Reloading manual,my rifle seemed to reach max velocity list at lower charges-another good reason to use a chrono. when reloading.I only tried to get within 50 to 100fps of the manuals velocity then stopped.
Reloading manual 4th edition
Sako cases,Federal 210 primers.

286gn Nosler,65.5gns N550,avg velocity 2513fps

320gn Woodleigh Solid,62gns N550,avg velocity 2330fps

These numbers are based on a small nos. of rounds and were measured 15ft from the muzzle.
Please consider this information worth what you paid for it!!!!!


Australia
I love a sunburnt country,
A land of sweeping plains,
Of ragged mountain ranges,
Of drought and flooding rains.
I love her far horizons,
I love her jewel-sea,
Her beauty and her terror
The wide brown land for me!
22 June 2008, 17:54
EP
+100% on using a chrono for load development(among other things)! I've got a factory production Mod70 in .25-06 that reaches max book velocities at 1.5grs under the max book recommended load. Not alot but enough to maybe cause a problem under the wrong conditions!

til later
23 June 2008, 03:39
capoward
Wombat…How is your custom chamber different from the CIP standard?


Jim coffee
"Life's hard; it's harder if you're stupid"
John Wayne